Question about JBL CREATURE II Computer Speakers
I brought a JBL Creature 2 speaker system in black off ebay hoping it to be a simple fix. As soon as i hook the adaptor up to the main unit, the fuse in the adaptor blows the moment its turned on. When the transformer is off load I.E not connected to anything it has a steady voltage and the fuse if fine.
I tried to replace the fuse in the adaptor but it blows up every time.
The adaptor is an 18v 3.5A with a 5A 250V Fast blow fuse.
I think you made a mistake with your fuse.
With my JBL i can see 9,5A 41FU.
Posted on Sep 08, 2008
There will be a short somewhere in the power supply. If you replace the fuse it will blow again. You COULD try a larger ampage fuse, but any electrician would not recommend this!
Posted on Jul 06, 2008
Tips for a great answer:
Aug 05, 2015 | JBL Audio Players & Recorders
Apr 08, 2014 | JBL Audio Players & Recorders
Mar 16, 2014 | JBL Creature III 2 Speakers
Mar 16, 2014 | JBL CREATURE II Computer Speakers
Sep 01, 2011 | JBL CREATURE II Computer Speakers
May 11, 2011 | JBL Creature III 2 Speakers
First go to this site and download and install this codec pack. Also, make sure you have your speakers set as you default sound device.
JBL Creature 2 are a computer
speaker system designed and sold by JBL. The system is made up of two
satellite speakers and an omni-directional subwoofer. The speaker system
connects directly to a computer's available sound card output jack or a
laptop's stereo output jack. Occasionally, problems can occur with the
sound quality and connection with the speaker system. If there is no sound coming from the speakers, check the cable
connections. Ensure the satellite speakers are firmly connected to the
matching jacks on the back of the Creature's subwoofer. The
connections are color coded and, in addition, each speaker connector is
shaped differently to fit only into one jack. Ensure the output cable is
firmly connected to the subwoofer audio in jack and the computer's
audio-out jack. Ensure the power button on the back of the subwoofer is
pushed inward. If everything is connected properly, the green lights
on the underside of the satellite speakers will glow.If there is
still no sound, tap the right-hand side audio-increase button on the
right satellite speaker until sound is heard. Also ensure there is audio
playing from the computer. Double check the lower right-hand side of
the window's main screen and look for a speaker icon. If the icon has a
red slash over it, click the icon and uncheck the "mute" option.
Hope this helps
Dec 30, 2010 | JBL CREATURE II Computer Speakers
Jul 03, 2010 | JBL CREATURE II Computer Speakers
Jul 12, 2014 | JBL CREATURE II Computer Speakers
1,029 people viewed this question
Usually answered in minutes!