The screen shuts off in 5 to 30 seconds will reset for another 5-30 second if you close and open the screen

Open the dishwasher door sufficiently to see the control buttons, then hold the two buttons with labels "Cancel Drain" and press for 3 seconds.
Close the door. Wait nearly 1 minute for the dishwasher to complete the cycle.
Open the door and hold the "ON/OFF" toggle.

Reset Bosch Ascenta Dishwashers
Shut off the child lock if needed by pressing and holding "Open the door far enough to see the keys, then hold the "START RESET" toggle until the "ACTIVE" LED become extinguished. On the SHE5AM model of Bosch Dishwashers, hold the "START RESET" key until the display clock shows "0:01".
Close the door and rest about 60 seconds. On the SHE5AM, wait until the display clock displays "0:00".
Open the door and hold the "ON/OFF" toggle.

check and replace caps in the power supply as they maybe leaking causing the voltages thought the unit to be unstable.

This is usually a memory error. You may have too many apps open and need to close them.

Double click the home button to bring up all the open apps on your iPad. They will list in a line across the bottom of the screen. If you are on iOS7 or later you simply swipe the screen shot of the app upwards to close the app completely. Then go back to your home screen and open the app as you normally do. This should force the app to reboot and work as intended.

After closing all the apps you should then shut down the iPad completely. You can do this by holding the sleep button on the top edge for about 5 or more seconds. You will then see a slider on the touchscreen pop up that indicates you can shut down the device. After it is completely shut down, count to 10 and then press and hold the same sleep button on the top edge for 5 or more seconds to reboot the iPad. You can also plug it into your computer or charger at this point to force the iPad to turn on.

There are two ways to reset an error code:

• 1. Open the front cover, wait for a few seconds and then close it. If the error is still there try the second method.
• 2. Shut down from the main power switch wait for a few seconds and then start it up while keeping the 'Utility/Counter' button pressed; keep it pressed until the reset button appears on the touch screen, release the 'Utility/Counter' button, touch the reset button and an OK message should appear below.Restart it normally and it should work. If the error is still there, try to follow the steps provided in the solution found based on your error code.

Usually you hold the Open/Close Button 10 to 15 second to shut down the player,
Reopen to see if it is OK
if not you will have to reset it you should have a little hole somewhere to insert a pin for reinitialisation of the player. (you are not giving us the model of youy player )
Notice by reinitialising your player ALL the music and other media will be erased !!!!!

My Uconnect is factory installed on my 2005 Dodge Truck. There are two control buttons on the rearview mirror for the uconnect. For a long time my uconnect would not fully function with my bluetooth phone and then lately it quite working most of the time. I did a bunch of research adn found this procedure to do a hard reset. After doing this the uconnect came back fully and all functions are working. I now this sounds stupid and you feel stupid doing it, but it did work for my vehicle.
1- Turn on ignition w/doors closed
2- Press both buttons on mirror for 15-20 seconds
3- Shut off ignition
4- Open door for 5-10 seconds
5- Close door and restart car, Uconnect is now reset

Try to unplug the printer from the power source. Replug after 10 seconds. This will give enough time for the printer to reset itself. If error still shows, you may refer to this article on Error: 'Cover open, please close the cover'. You can also contact Lexmark technical support for additional assistance. Thanks

open ignition disconnect battery and reconnect negative first and then positive, shut ignition wait 5 seconds and open ignition wait 5 seconds (do this steps 3 times) and remove key and after 15 seconds insert key and repeat same step once but instead of 5 seconds wait 15 second and start the car that should reset the OMU and the EPB.

I had that problem too I'll I did was press the reset butoon on my unit and everything resetted but the bypass code, you have to reprogram your stations and the time thats it