My avh-x2500bt keeps resetting

The wiring harness diagram for connecting the AVH-X2500BT receiver to the car wiring is shown on page 46 of the owner's manual. Crutchfield has the manual on the product page: https://www.crutchfield.com/S-KZq3UpLmFAw/p_130X2500BT/Pioneer-AVH-X2500BT.html . Look on the right hand side of the page on the Overview tab. The link is below the "What's in the box" header. The direct link to the manual is currently here: https://pdf.crutchfieldonline.com/ImageBank/v20130710152000/Manuals/130/130X2500BT.PDF . You can also find the manual from Pioneer on the archived receiver manual page: https://www.pioneerelectronics.ca/POCEN/Car/ch.DVD-Receivers.Archived .

I hope this helps.

Cindy Wells

probably was not installed correctly.needs to be wired correctly or has a bad fuse

Mine does the same thing, its not a wiring issue as I put a different Pioneer Head Unit in its place and the problem went away. I put it back and the problem returned

Hey,

I own the exact same model as you and I found a video on youtube explaning how to bypass the DVD region. I bought it in the States (region 1) but I live in Brazil (region 4).
See this and if you are not going to intall it yourself show it to yout tech guy: http://www.youtube.com/watch?v=lDGZEZrUdRo
Hope this helps!

my avh p 4450 radio shows error10 don't want to pair up how do I reset radio I did plug it out already and theres no reset button on radio thanx

The error indicates that the AVH-X2500BT can't read the disc. The DVD could be dirty or scratched or upside down in the tray. Try cleaning the disc or putting in another DVD. The other issue is a mechanical or electrical problem with the unit. Turn off the car's ignition then press the Reset button on the unit. The reset button is recessed and has to be pressed with a pen tip (it's on the far left of the front button array).

The manuals for the unit is available here: http://www.pioneerelectronics.com/StaticFiles/Manuals/Car/AVH-X2500BT_OwnersManual010213.pdf . See page 4 (page 7 of the PDF) for the location of the Reset button. You will need Adobe Reader or a similar program to read the manual. If the reset doesn't work, you ,may need to have the unit serviced. (Check that your electrical system doesn't have any fuse or ground problems first.)

I hope this helps.

Cindy Wells

I am a business owner and installer and this is the best, and correct way to do this. I feel that you explained relays in a way where anyone can understand them. Thank you for this write up, I hope this helps other people.

I’m happy to assist further over the phone at https://www.6ya.com/expert/taw_96620811415579f2

I removed my Pioneeer AVH-P4000DVD from my Tacoma pickup to upgrade to an AVH-X2500BT and installed the AVH-P4000DVD in my mustang cobra and found myself suffering from a strange issue (that seems to have happened to a lot of you too). All of a sudden I had lost my audio on my USB and AUX inputs. I tore the net apart for a solution, pouted, drank, and started doing more and more research, and check instruction manuals. I eventually found the solution based of one lone comment someone had mentioned regarding ground and comparing the wiring diagrams for the two decks. I pulled the pioneer harness out of truck and compared it to the pioneer harness in my car and found an inconsistency. This may solve the issue that plagues you as well. Check the harness you are using. I was not able to find a pinout, but the 4 wires on one end of the harness for the AVH-P4000DVD should be +12V battery, +12V ignition, ground, and ground, (yellow, red, black, and black). If you have received the harness for a newer model of pioneer AVH it will still fit fine but one wire is out of place. The second ground wire you need has been replaced by a purple reverse gear sensor for the backup camera. Ground out the purple wire and it should solve your issue... It did for me. Good luck.

Did u every find out why it is doing that mine is doing the same thang need help

I have the same problem. I conect the red and yellow wire at positive battery and the black wire to ground, but it doesn`t work. I press the reset button and nothing. I am try to turn it on with a power supply. could you tell me or show with a picture how to conect All?

It`s AVH - P5000DVD

regards

From Venezuela.