How to connect SAMSUNG bluetooth headset SBH 650 to my Nokia e71

Tony you can get pairing instructions here. Motorola Support Find Answers Motorola Mobility Inc

Mark
Motorola Support
Motorola Owners Forum

1.first on samsung bluetooth device
2.press& hold call answer button in bluetooth device now light is on ,not blinking
3.and then search your bluetooth device by your phone and pair.

Did you visit the website of Samsung?
I think it should have , or buy one instead.

electronics wholesale

hello,please kindly put your nokia bluetooth on and also power the bluetooth headset on so as to pair them. 1.search the bluetooth headset with your nokia then you might be asked to enter a code,you then enter 0000 and ok it. 2.when the pairing is complete your bluetooth headset displays and blinks red light.
wish you good luck.
take care.

Hi ttc81,

Please make sure that your phone's bluetooth is in shown to all mode and not in hidden mode.

Also check if there are any particular instructions in your bluetooth headset's manual for pairing a device.

If the above procedure does not work , try to pair the bluetooth with another mobile phone and if it gets paired , then it means that your bluetooth is not compatible with Nokia E71.

Hope this helps ...:) Let me know in case you have any queries.

Make sure that the headset is properly charged before following the instructions below.Please follow the detailed instructions in the correct manner to successfully pair your Nokia E71 with the BH-208 Headset.
Charge the battery
The headset has an internal, non removable, rechargeable battery.Do not attempt to remove the battery from the device, as you may damage the device.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger connector. The red indicator light is on while charging.
It may take a while before charging
Switch the headset on or off
To switch on, press and hold the power key until the headset beeps and the green indicator light is displayed. To switch off, press and hold the power key until the headset beeps and the red indicator light is displayed briefly.
Pairing the headset
1. Ensure that your phone is switched on and the headset is switched off.
2. Press and hold the power key until the green indicator light starts to flash quickly.
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.
4. Select the headset from the list of found devices.
5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.
If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices.The headset is now ready for use.
Hope you are satisfied with my solution.Your valuable feedback would be appreciated.Thanks for choosing Fixya.

TinuAlbinAlex.

i cannot play my music player to my bluetooth headset

You have to go in to the blue tooth option on the menu of the p2. Then click search. Hit the sync button on the headset. It should find it in less than 20 seconds.

To fix this issue. Hold down the call button on headset ad turn the headsets on and keep holding onto the call button for bout 20 seconds. Then the headset will be discovered by the phone as an audio headset.

I think the samsung T629 does not have stereo bluetooth. It would have to have a 2.0 class bluetooth profile to play music through the headset