Changed ink cartridges printing all blank old ones work ok any help

Do you mean your Epson Printer Printing blank pages? The Epson printer printing blank pages due to wrong paper size, outdated printer driver, Empty ink cartridge, dirty print head, improperly installed ink cartridge, and more.

Follow the steps to fix the Epson printer printing blank page issue:

·Restart the printer
·Fill the empty ink cartridge and reinstall the new ink cartridge
·Update printer drivers. If you have done all the above steps but still the printer printing blank pages.

Then follow more steps to fix the Epson printer prints blank pages issue.

You have to replace all ink cartridges, it is somekind selling trick. I have epson printer too and it wont work if you replace just one ink, and i have 6 ink cartridges :D

Crashed program in black chip with others. Replace chip at new ink tank (black) with the old one. Reset it before using hardware resetter.

clean also the tab circuit to the printer maybe it suffered loss connection..
________________________________________________
unplug and plug your printer...and
try to wipe the cartridge on a wet cloth ..to determine that there is a ink going out on it...

Normal 0 Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Put new in cartridges in printer.
Page prints out blank.
Have cleaned the print heads 3 times.
Need help!

Have you tried a cleaning cycle? If not, try one. Now run a nozzle check using the status monitor (right click the little printer icon in the bottom right corner of the screen and select nozzle check). Is there any sign of ink on the paper. Try up to three cleaning cycles. If ink is now flowing, but not yet perfectly, don't carry out any more cleaning cycles. Just leave the printer for 24 hours (to allow any air in the print head to disperse). Then repeat the cleaning cycle/wait process. It may take a while to restore a perfect nozzle check print. If these actions produce no positive results, report back.

I think we can put this one to bed as "Poster very unhappy with Epson Printers and Fixya!"

Take the cartridge out and put it back in then try to print, if it is still the same
try cleaning the print heads>control panel>right click on c66 and go to printing
preferences>maintenance tab>print head cleaning>do it 3 times and then try to print

If you have tried new cartridges and many cleaning cycles with no change, then it would be best to just replace the unit. Contact Epson as they may be able to offer you a good price on a replacement unit.