Hi,
The method you are talking about is present in MAIN MANU . PAL,NTSC etc are video singnals system and BG,DK,I etc are audio signals system and both are in manu of the set.
As far as concern you require the method of entring service mode. It is given below :
ENTERING SERVICE MODE:
In standby mode, press buttons on the remote commander sequentially in rapid succession as shown below:
DISPLAY---> CHANNEL 5----> VOL (-)--->POWER
Note that this differs from entering the service mode (volume [+]).
Thanks for using fixya.
227 views
Usually answered in minutes!
×