J-7107 error code

What has paper got to do with Home theater System?
What is the error code and which make/model of printer

Check the saddle sticher section doors and sensors

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

If the error does not go away, there may still be a scrap of paper blocking several sensors, or the sensor may be faulty.

Check the complete paper path very carefully, it only takes a small fragment of paper stuck somewhere to signal a paper jam. Also check that the paper sensors have returned to their normal positions. See that the printer has not picked up a second sheet of paper and this is somewhere in the path.

I have this printed and if you read (carefully) through the manual it tells you it doesn't like single sheets of paper. If ever my paper feeder tray runs below say 3 sheets then this error will crop up so keep it topped up with paper. The same goes for photo paper too.

The 202.03 error code has to do with an early life failure of the fuser. Try replacing the fuser. If that doesn't work, a tech is needed to replace rear door. Don't forget to reset maintenance counts when you replace fuser!!

Hi Mike,

This error can be caused by many reasons, some of them are:

Caused by Paper Stuck Under the Second Transfer Roll

Sporadic or Intermittent 200 Paper Jams

"200 Paper Jam" Resulting from a Possibly Damaged Tray

"200 paper jam" When Attempting to Print from Tray 2

To troubleshoot this problem, please click the links with their respective causes.

Please rate it fixya if it was helpful.

Thank you

Open ALL paper jam locations on the machine. The jam code only means the paper jam is somewhere BEYOND the paper drawer. Check ALL jam locations including duplexer, bypass, and ALL paper drawers.

Try feeding paper from the front, if it works, your paper pickup rollers maybe having problems (dusty/worn-out).

- Bianca