Are my Orion tv's purchased in 2002 digital ready

Hello
You haven't given a clear problem post ebefore me. You have only give the model number and brand name of your TV only. Not give the model number of your RCA converter box. Yet i posts a solution to your problem, assuming that your RCA Converter box model number is " DTA 800B1 " The three digit setup codes for Orion TV with this RCA converter box are: 029, 189, 200
ok
gopakumarg43

is the model number correct? Can't find the details of your television.

Does your tv use digital input? or analog if its analog then you need the box.

do you have cable ? if not you may need to have a digital box in to see the channels you want

If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

I found the solution on AV Forums. Here's the link:

http://www.avforums.com/forums/lcd-televisions/635155-orion-tv-products-help-advice.html#post6566313

No, it is not a digital ready television. You will need a box if you are planning on using an antenna with it.

If you have it hooked up to cable or a satilite reciever then you don't need a box. It will continue to work like it is now.

Usually on the back of the set there will be a hookup for digital tuner. To get the converter box before Feb 2009 go to http://www.dtv2009.gov

sorry this is all I could find with out a model #

http://www.orion-tv.net.au/Remotes.pdf

http://www.orion-tv.net.au/manual/20VROT.pdf

I’m happy to assist further over the phone at https://www.6ya.com/expert/james_1cb31da1bc8c6102

if it was purchased back in 2003 chances are that it is not digital TV ready and you would need to purchase a converter box.

Manufacturer's Phone Number may be 800-289-0980. Not sure if this is the manufacturer number, but it is the number listed on the Orion TVDVD092 box to call if you still have questions after reading the manual. I need a manual as well. I do hope that they will send me one.

that request is not available...firm-wared chip proprietary from orion