Question about Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

Washing machine not starting

Hi,

  I am having a Whirlpool AWG329 washing machine. It was working fine. now when I switch on the power, the indicator gets on, and when I press on button of the machine, it trips and the power fuse of my house gets trips.

  Please help.

 

Thanks in advance,

Amitabh Tripathi

[email protected]

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

It sounds like you could have a short in one of 3 places – the start button, the timer, or the hot/cold water solenoid.  The start button is the least likely so I’d first check out the solenoid.  Does this happen when it’s set on hot only, cold only, and/or warm water?  If so, probably you’ll have to get at the solenoid by opening up the top.  Disconnect the wires to the solenoid and try again.  If the circuit blows, it’s not the solenoid.  If it doesn’t blow, replace the solenoid.  If it’s not the solenoid, it’s probably a burned timer and you’ll have to replace that.

Posted on Oct 14, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to use whirpool AWG 300 dryer/washing machine


I have got a whirlpool awg 300 but why every programs I am using it is getting 7 hours longer? this make me waiste a lot of elettricity..thanks

May 09, 2012 | Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

The washing machine does wash the clothes but does not dry. the make of the washing machine is whirlpool awg 338


Have you tried to clean out the filter on the bottom of the machine maybe it is not emptying fully so it will nit dry!

Oct 30, 2010 | Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

Hi I have an AWG 329 washer drier. The water won't


the pump is either broken or there is a block in the drain line sadly with these ne high tech units they can break down within weeks ive seen 3000 dollar washers and fridges writen off as quality test are very weak

Apr 21, 2010 | Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

Noise from washing machine


Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101



fddfs

Oct 25, 2008 | Whirlpool AWG329 Front Load Washer/Dryer

3 Answers

Have just got new whirlpool aqua steam washing machine and it keeps stopping with the code f 23


F23 codes indicates an electronics communication problem with the washerThe following list of codes indicates an electronics communication problem with the washer. To remove the error display, press Pause/Cancel twice.
If Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, then call for service

Jul 18, 2008 | Whirlpool Washing Machines

1 Answer

Will not spin


its prob the brushes that need replaced or your motor has a fault and needs replaced the spanner symbol means it needs a service

Jan 06, 2008 | Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

Whirlpool washer/dryer Awg338 trips the mains?


Can't help you with your problem, but I also have a AWG338, that is coming to the end of its life. If you are after a second hand one for spares email me [email protected]

Dec 10, 2007 | Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

Replacement For Whirlpool AWG329 washer/dryer


Not sure if this will help, but Whirlpool has a pretty neat tool that can help you configure your laundry-room layout: LAUNDRY-ROOM LAYOUT

Nov 18, 2007 | Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

Spins twice then clicks through all cycles


open to see behind the panel which holds the switch. look for any wires disconnected

May 10, 2007 | Whirlpool AWG329 Front Load Washer/Dryer

Not finding what you are looking for?
Whirlpool AWG329 Front Load Washer/Dryer Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...