Samsung ap50m1an in led E4 error oucer

These are error code list of samsung range

Samsung range or wall oven error codes

The 4E (4C) error indicates that the washing machine has detected that there is a problem with the water supply. The most common reason for this error is a blocked or kinked water supply hose.
Aug 23, 2021

How to resolve 4E or 5E codes on your Samsung Washing ...

https://www.samsung.com > ... > Home Appliance
About featured snippets•
Feedback

People also ask

How do I fix E4 on my washing machine?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> What does E4 mean on a washing machine?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px;"> Feedback

How to resolve a 4E or 4C error code on a washing machine

https://www.samsung.com > ... > Home Appliance
A problem with the water supply is usually the result of low water pressure or a low flow rate on the mains water supply to the machine. This means that the ...
‎Samsung United Kingdom · ‎How to clean the detergent...

If it is an E4 error then it means uneven load. If it is a 4E error then it is the fill valve. It seems that the large loads are unbalancing it. I recommend replacing the shocks on the washer. That should solve the problem completely.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

hi Judi.
this is what i found.

If your Samsung washing machine is displaying a E4/error code on the control panel after completing the spin cycle and the clothes are still wet, we've got the solution for you. This fault is most commonly caused by an unbalanced washing machine load.

Samsung Washing Machine E4/UE Error Code ' eSpares

https://www.espares.co.uk/advice/symptom/samsung-washing-machine-e4ue-error-code
What does 4e mean on my Samsung washing machine?This is essentially a fill timeout error which will normally mean that either the water isn't on or that an inlet valve has failed or pressure switch problem check pipes as well. Water fill time out: The washing machine has failed to fill with water in a reasonable time.24 Nov 2015Samsung washing machine error code 4E and E1 Fault Not filling in ...https://www.youtube.com/watch?v=cFlnxeB0P0gSearch for: What does 4e mean on my Samsung washing machine?
or try this link.
Samsung front load washing machine error code e4 Google Search

PDF]SERVICE Manual - Quietside

https://www.quietside.com/archives/.../Service%20ACC1800C.pdf

When error occurs in air conditioner, error code is displayed on indoor unit .... Display priority order at overlapping error : E1?E4?E5?P0?P0?P5?P6?t1? ...

Midea air conditioner error codes

airmaster.net/midea-air-conditioner-error-codes/

Midea air conditioner error codes. Indoor unit error code explanation: R series: ... E1, Indoor / outdoor units communication protection. E2, Zero-crossing signal error ... E4, Outdoor unit temp. sensor or connector of temp. sensor is defective.

[PDF]Download the Fault Error Code Booklet - Samsung

Check you Freon for low pressure or the low pressure switch.

The Samsung washer error code reads 4E and means problem with the water supply. Please check the water pressure, also check for blocked or kinked water supply hose. You can learn more about all Samsung washing machine error codes in this helpful article: https://www.justfixed.co.uk/samsung-washing-machine-error-codes/

Hope this is helpful and good luck!

Best,
Dave, Just Fixed

E4 meaning high discharge temperature or pressure. Not able to find 58 but I know it also is a refrigerant issue dealing with pressure. Have a tech come in nd do the following:

Normally in cases like this your best option is to reclaim the system, pull a deep vacuum on it and then recharge it with fresh refrigerant by weight as per the manufacturer's recommendations.

A Canon MP145 E4 Error Code means that your Printer didn't detect the Ink Cartrigde. It sometimes happen when you're using a non-original cartridge or infusing it. When Canon Printer detect this abnormality, the first Canon self defense system is by Stop Printing. And then displaying some messages on your Computer Screen, indicating that your ink cartridge have to be replaced because it's EMPTY.
Below are the manual way to correct this problem :
1. Turn On Your Printer. 2. Wait Till The Printer Led Screen Show The Error Code ( E4). 3. Then Press and Hold Black & Color Button for about 5 - 10 seconds.
Hope that your problem is solved.Dont forget to give a positive feedback after pressing the accept button.

E4 error = Unbalanced error - The load in the drum is unbalanced.
Try switch off the power and rearrange or remove some of the items to be washed. If not help the sensor may need to be replace.