Question about Canon PIXMA iP90 Mobile Printer

1 Answer

CAnon Pixma IP 90

Attempt to print and comes out light, Replaced all ink cartridges and cleaned. Still Does not work.

Posted by BHVE on

  • cutlooses Nov 18, 2007

    the same section on any print job does not print. remainder of page is fine. tried 2 different iP90s and got the same result. Have done every clean in the book and reinstalled latest drivers.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try waiting for about a day so the ink can flow down to the print head then try again

Posted on Nov 06, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have error code print unable 51 what do I do to clear?


Most likely this is a print head issue. The print head is what the cartridges sit in inside of the printer. To attempt to resolve it, do the following:

(1) Open the printer
(2) Remove the ink cartridges from the print head.
(3) Use cotton swabs dipped in hot water or a mix of hot water and isopropyl alcohol to thoroughly clean the print head.
(4) Repeat this until there is no ink residue coming off on the cotton swab.
(5) Once finished, allow to dry and replace the cartridges
(6) Try to print something now

If that does not work then you have one of two possibilities:
(1) One of the ink cartridges is defective and causing the error
(2) If it's definitely not that, then the print head will need to be replaced.

Nov 10, 2016 | Brother MFC-5460CN InkJet Printer

2 Answers

What is error B200 when attempting to power up


http://www.printerdiary.com/2011/09/canon-error-b200-how-to-fix-it.html

Error B200 on Canon printers is a print head error. The print head is what the cartridges sit in inside of the printer. To attempt to resolve it, do the following:

(1) Open the printer and wait for the carriage to slide over
(2) Remove the ink cartridges from the print head.
(3) Use cotton swabs dipped in hot water to thoroughly clean the print head and each ink cartridge.
(4) Repeat this until there is no ink residue coming off on the cotton swab.
(5) Once finished, allow to dry and replace the cartridges
(6) Try to print something now

If that does not work then you have one of two possibilities:
(1) One of the ink cartridges is defective and causing the error
(2) If it's definitely not that, then the print head will need to be replaced.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Mar 24, 2012 | Office Equipment & Supplies

1 Answer

My Lc61 will not print black--on the test page, the colors are fine. I've replaced the ink cartridge and it says it's full but won't print


Most likely this is a print head issue. The print head is what the cartridges sit in inside of the printer. To attempt to resolve it, do the following:

(1) Open the printer
(2) Remove the ink cartridges from the print head.
(3) Use cotton swabs dipped in hot water to thoroughly clean the print head and each ink cartridge.
(4) Repeat this until there is no ink residue coming off on the cotton swab.
(5) Once finished, allow to dry and replace the cartridges
(6) Try to print something now

If that does not work then you have one of two possibilities:
(1) One of the ink cartridges is defective and causing the error
(2) If it's definitely not that, then the print head will need to be replaced.

May 26, 2011 | Brother Office Equipment & Supplies

1 Answer

Print output is coming out fuzzy.


Hi,

Most likely this is a print head issue. The print head is what the cartridges sit in inside of the printer. To attempt to resolve it, do the following:

(1) Open the printer
(2) Remove the ink cartridges from the print head.
(3) Use cotton swabs dipped in hot water to thoroughly clean the print head and each ink cartridge.
(4) Repeat this until there is no ink residue coming off on the cotton swab.
(5) Once finished, allow to dry and replace the cartridges
(6) Try to print something now

If that does not work then you have one of two possibilities:
(1) One of the ink cartridges is defective and causing the error
(2) If it's definitely not that, then the print head will need to be replaced.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

May 04, 2011 | Brother MFC 420CN All-In-One InkJet...

1 Answer

How do i clean the heads on my lexmark x4580 printer the black is not printing but the colour is ok and the cartridge is full of ink cheers


  • Hello,

  • Most likely this is a print head issue. The print head is what the cartridges sit in inside of the printer. To attempt to resolve it, do the following:

  • (1) Open the printer and wait for the carriage to slide over
  • (2) Remove the ink cartridges from the print head.
  • (3) Use cotton swabs dipped in hot water or a mix of hot water and isopropyl alcohol to thoroughly clean the print head and the electronic contacts on each ink cartridge.
  • (4) Repeat this until there is no ink residue coming off on the cotton swab.
  • (5) Once finished, allow to dry and replace the cartridges
  • (6) Try to print something now

  • If that does not work then you have one of two possibilities:
  • (1) One of the ink cartridges is defective and causing the error
  • (2) If it's definitely not that, then the print head will need to be replaced.

  • Thanks

Mar 10, 2011 | Office Equipment & Supplies

1 Answer

Error 0xc19a0035


Hi Good day!!!
Most likely this is a print head issue. The print head is what the cartridges sit in inside of the printer. To attempt to resolve it, do the following:

(1) Open the printer and wait for the carriage to slide over. If for some reason it does not follow these instructions:
(a) Unplug the printer
(b) Manually slide the carriage over until you can get the ink cartridges out.
(2) Remove the ink cartridges from the print head.
(3) Use cotton swabs dipped in hot water or a mix of hot water and isopropyl alcohol to thoroughly clean the print head.
(4) Repeat this until there is no ink residue coming off on the cotton swab.
(5) Once finished, allow to dry and replace the cartridges
(6) Try to print something now

If that does not work then you have one of two possibilities:
(1) One of the ink cartridges is defective and causing the error
(2) If it's definitely not that, then the print head will need to be replaced.

Thank you for using FixYa

don't forget to vote thanks!!

Nov 14, 2010 | HP Photosmart C7280 Laser Printer

2 Answers

Stripes in my color print jobs with Officejet 9110


HP software comes with a head cleaning option.. run that thru 3x and make sure you clean all of the printer ink cartridge using rubbing alcohol.

Nov 13, 2007 | HP Officejet 9110 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA iP90 Mobile Printer Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2281 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...