Press the on key while holding the volume key for about 5 seconds .Then have your wife run to the garage and get the biggest hammer she can find by this time you should have gotten fed up with the whole idea of holding the buttons and slung the thing on the floor . your wife should hand you the hammer ,take the hammer and place your feet shoulders width and crouch with your knees bent then raise the hammer and smash the holy crap out of the china made piece of crap watch the shattered pieces fly across the floor .Then take a real big deep breath and say to your self thank god thats over , then set down on the couch and call radio shack for a head set with a usb connector which will easly plug into the ps3 usb port ! You will have 2 head phones to cover your cold ears while you play and the microphone will be adjustible ! I hope this helps .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To make your headset discoverable, make sure it is powered off, then hold the power button for 10 seconds until the power light flashes rapidly or stays on completely. Make sure you don't let go of the power button once the headsets turns on - wait until it reaches pairing mode.
The passkey will be 0000.
First you have to enable the Bluetooth to scanning mode, To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work
The default passcode may be 1234 or 0000 or 8888
Make sure the Jabra headset is set to pairing mode, otherwise the phone cannot find the headset. The manual should have instructions to set the headset in pairing mode. While the headset is in pairing mode, have the G1 search for the headset (Settings > Wireless Controls > Bluetooth Settings). When it finds the headset select it and type 0000 for the PIN code.
If you hold down the button, it will turn the light blue, keep holding it till you can connect it. It will come up as Jabra BT125, hit connect. Then it will ask for a password. The password is 0000. Then it will connect :)
I was reading in another problem how this guy lost his manuel, and used the internet manuel to get it into paring mode. You are to Hold down the call button untill it turns blue, try that and let me know what happens. Here is the site for the manuel.