Lost cd for installation ge easycam

This is the driver for the GE EasyCam web cam. Only works up to XP though.
http://www.jascoproducts.com/support/download-files/98063.zip

For Vista and Windows 7, you will need this driver:
http://www.jascoproducts.com/support/download-files/98063_v.zip

Jasco makes the camera for the GE name. The drivers for the GE EasyCam (and other GE web cams) are available for Windows 95, 98 and XP from http://www.jascoproducts.com/support/software-downloads.asp#pccams . Check your model number, the EasyCam listed is 98063. The direct link to the driver is http://www.jascoproducts.com/support/download-files/98063.zip . Right click on the file after downloading and select Extract All. Then install the driver by pointing the Windows wizard to the appropriate folder where the files were extracted to. The instructions are available in the right hand column from the first link.

If you have Vista or Windows 7, go to http://www.jascoproducts.com/support/software-downloads-win7.asp instead. The direct link to the driver for the EasyCam is http://www.jascoproducts.com/support/download-files/98063_v.zip .

I hope this helps.

Cindy Wells

Download your cam software from here

http://www.jascoproducts.com/support/software-downloads.asp#pccams

you can use this link as well

http://www.jascoproducts.com/support/download-files/98063.zip

Driver
http://www.jascoproducts.com/support/download-files/98063.zip
Instructions
http://www.jascoproducts.com/support/download-files/98063.pdf
Unplug the cam, uninstall any cam software you've got, reboot, install the driver, then plug the cam in.

http://www.jascoproducts.com/support/software-downloads.asp

Click on this link

Scroll down to PC Cams and choose Easy cam click on ZIP to download the zip file . Run the setup file in it to install the software.

Good luck.

necesito instalas my easy cam 98063

The drivers are available on the following Link :

http://www.jascoproducts.com/support/software-downloads.asp#pccams

Select appropriate model and download !!

Best of Luck,
rajesh_im

Try: http://www.driverguide.com/

If the cam is from china is probable that you don't find it.

But you can use another driver camera

put the cd in the computer but don't run it.
connect you cam usb cable.
wait for the auto dedection.
follow the steps (chose auto install)
chose continue for security message.
if all the setups is good, it's ok ;)
try it by msn

i need to know how to download my GE easy cam. I lost my disk..it's a HO98063