Question about Televison & Video

1 Answer

Recording on blaupunkt VCR RTV 430/540 from T.V

I have brought a 2nd hand Blaupunkt VCR which doesn't come with a manual and I have connected it to my T.V o.k but it's not seeming to record and I think I may need to tune the T.V into the VCR but as I have no manual I have no idea how to do this - any help would be appreciated - cheers Phoebe

Posted by Sixty on

Ad

1 Answer

Debra V

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

The VCR should record even without a tv attached.  The VCR will display what channel it is on.  The TV is only for viewing.

 

Cable hook up is ..

1. from the wall (or antenna) to the VCR input jack

2. from VCR output jack to TV input jack

 

Most TVs use channel 3 for VCR viewing.  You will need to hit the TV/VCR button on the VCR also.

Posted on Oct 13, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am using a converted car battery charger to charge my 12volt ride on car, however it doesn't seem to hold the charge for maybe 5 minuten then flat again and there is no reverse. Do I have to hav


u have boiled your battery dry either replace batt or pop top cover off there is 6 or 12 little rubber caps remove cap add distilled water till even with hole replace cap charge viola!

Mar 06, 2013 | Toys

1 Answer

Jvc dr-mv100 won't eject dvd and doesn't sound like it's trying


Check and replace the CD loader mechanism. It is faulty. Do not loads CD onto reading deck properly.

Jun 06, 2012 | JVC DR-MV100B DVD Recorder/VCR

1 Answer

How do I connect my Sansui 6010B VCR with an analog TV and a DTV tuner?


two ways of connecting VCR with Analog TV with DTV tuner.
DTV tuner (RF) output to VCR (RF) input,VCR (RF) output to analog TV (RF) input.
turn DTV tuner on (VCR should have a TV\VCR switch that makes signal coming from tuner BYPASS VHS right into TV) note:: change channel FROM tuner.You should be able to record by placing a blank tape and pressing RECORD.
2ND. DTV tuner, VCR, should have a RCA in\out connections...Audio & video.You need a RF\RCA bypass switch. It has a INput with RCA connections to a RF signal out that goes to the RF Input of analog TV

Jun 21, 2011 | Sansui VHF6010 VHS VCR

2 Answers

How do I change the vcr to 'SLP' - it seems to be stuck on 'SP'. (There is no "speed" button on my remote.)


Use the remote to get into the setup menus. There may be an option to change tape speed when recording. Alternatively, when you press record on the remote (or deck), you may have option to change the tape speed there.

The VCR part of your deck may be able to playback, but not record in SLP mode.

Searched around for the manual for your machine, and though there are references to it, it appears that a manual / information page doesn't exist for the model # that you listed.

Jun 11, 2010 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

HOW TO INITIATE SET-UP PROCEDURE FOR 2ND HAND VIDEO/DVD PLAYER


You should have the main aerial going into the dvd and then a black flylead going back into the tv.If you go into the on screen menu you find a set section so you can re-tune the stations.

Aug 17, 2009 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Dubbing from vcr to vcr


Connect with RCA cable to RCA jacks\plugs::
output [player] audio to INPUT [recorder]
OUTPUT [player] Video to INPUT [recorder]
*************************************************
Place blank tape in RECORDER, Tape that you want to record from into PLAYER.Press Record [recorder machine], wait one second, press PAUSE.( thats to give record tape "breathing" space.) Set up your player tape to start playing. When you know what you want to record, press PAUSE again to begining recording. Press PAUSE after the recorded section to install 2nd tape, etc. etc.
NOTE:: some VCRs use PAUSE 2nd time to release and continue recording, while some machines you must press RECORD button again to release PAUSE. you must expirement before begining your project.

May 24, 2008 | Zenith VCS442 VHS VCR

2 Answers

How to Record TV Programs w/o Cable Box/Satellite Receiver?


if there are rca ports on the front of the vcr which are output, connect those to the tv input 3, the input to input connection is definitely not going to work...

May 09, 2008 | Sony RDR-VX525 DVD Recorder/VCR

2 Answers

Picture blinking on a Sharp Quos HD TV


Is the VCR sitting on top of your TV? This has caused problems in the past...accordianman

Feb 18, 2008 | Panasonic PV-8400 VHS VCR

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

568 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6184 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...