Make sure the spa is not on sleep mode "SLP" or economy mode "ECO". Without knowing what type of spa you have it's hard to diagnose but it's possible your pressure sensor or high limit sensor it temporarily out of balance. If that's the case, it will resolve itself. If the problem persists you have a faulty faulty pressure switch or sensor.

May 05, 2013 | Pool & Spa

1 Answer

Thermal Dynamics cutmaster 81. when turned on it cycles blowing air but no arc. two green lights are flashing. pulling the trigger doesn't do anything, air keeps cycling

Hi; Check the following troubleshoot and see if you can ID the problem:
Problem: Gas flows continuously when power is turned on, AC indicator flashes 1. Torch switch is activated (closed) before user turns power on. a. Release torch switch. 2. Faulty torch switch a. Check torch switch for continuity. Replace if necessary.
Problem: Gas flows continuously; Torch will not pilot when torch switch is activated; AC indicator ON 1. System is in SET mode a. Change to RUN / Rapid Auto Restart / SET switch to RUN (up).
Mostly of the problems found is that customer has the switch line on to SET instead of RUN.
Hope this help. Have a good afternoon.

Sep 16, 2011 | Welding Tools

1 Answer

The exclamation point, the red dot, keeps popping up and it is also red on 85-5.9 and only air is blowing out

Try and replace the swirl ring. We had the same problem and it fixed it. They cost around 35 bucks

Dec 10, 2010 | RTO THERMAL DYNAMICS CUTMASTER 52 PLASMA...

2 Answers

I need a new grill for my thermos grill 2 go fire and ice can you help please

Hello. go to this link to order a new one from the company.
http://www.charbroil.com/Consumer/product_detail_m.aspx?ProductSeriesID=25&Name=Series

Mar 19, 2010 | Thermos Grill2Go Fire+Ice

2 Answers

Plazma cutter/no arc

check pilot/output board

Sep 05, 2009 | Welding Tools

1 Answer

I need a grate for a thermos grill to go fire & ice

Check your model number.
http://www.charbroil.com/Consumer/ReplacementParts.aspx?ProductID=678

Jul 07, 2009 | Thermos Grill2Go Fire+Ice

2 Answers

Plasma cutter problem - is cutting on beveled angle.

worked on units for several years,my first thought was torch consumables,then torch itself,so here we go.make sure all the consumables are exact for the torch,make sure all parts are brand new,(all parts,that way we can elimenate that part of trouble shooting).check that the ground is tight on the unit and work peice.When you bought the new torch head did you also buy the lead to the head?If not possible that could be the problem.

May 16, 2009 | Welding Tools

1 Answer

Thermos Grill2Go Fire+Ice Problem

check it out but get in line behind me:

http://www.charbroil.com/Consumer/product_detail_e.aspx?ProductID=968&CategoryID=

This thing is hard to find. Mine's clogged and it's NFL season baby!!! Not in stock until mid-October but genuine and 22 bucks+shipping!

Happy Tailgating!

Sep 14, 2008 | Thermos Grill2Go Fire+Ice

4 Answers

Thermos Fire&Ice Grill2Go user's manual

Grill2Go manual http://www.appliancefactoryparts.com/content/pdfs/8623.pdf

Jan 23, 2008 | Thermos Grill2Go Fire+Ice

Not finding what you are looking for?

View Most Popular

THERMAL DYNAMICS CUTMASTER 102 PLASMA CUTTER 1-1330-1

Welding Tools

When we start cutting the sheet with the torch the flame blinks and red indicater (with name D29)glows on the pcb. what is the reason for this.

Thermal Dynamics CUTMASTER 81 Air Plasma Cutting System 460 Volt, 40181 Phase With SL60 75 Hand Torch With 20 Leads

Open Questions:

0 Answers

flashing red light on cutmaster 102

Feb 07, 2013 | RTO THERMAL DYNAMICS CUTMASTER 102 PLASMA...

Ask a Question

Usually answered in minutes!

Are you a RTO Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for RTO THERMAL DYNAMICS CUTMASTER 102 PLASMA CUTTER 1-1330-1? Or just drag it here!

Thermo dynamics cutmaster 102 does not fire flashes consumables bad code 85 but it has a new lead and consumables

Add Your Answer

Attachments: Added items

Related Questions:

When we start cutting the sheet with the torch the flame blinks and red indicater (with name D29)glows on the pcb. what is the reason for this.

Display code p=

Thermal Dynamics cutmaster 81. when turned on it cycles blowing air but no arc. two green lights are flashing. pulling the trigger doesn't do anything, air keeps cycling

The exclamation point, the red dot, keeps popping up and it is also red on 85-5.9 and only air is blowing out

I need a new grill for my thermos grill 2 go fire and ice can you help please

Plazma cutter/no arc

I need a grate for a thermos grill to go fire & ice

Plasma cutter problem - is cutting on beveled angle.

Thermos Grill2Go Fire+Ice Problem

Thermos Fire&Ice Grill2Go user's manual

Not finding what you are looking for?

THERMAL DYNAMICS CUTMASTER 102 PLASMA CUTTER 1-1330-1

When we start cutting the sheet with the torch the flame blinks and red indicater (with name D29)glows on the pcb. what is the reason for this.

Open Questions:

flashing red light on cutmaster 102

Related Topics:

Ask a Question

Top RTO Welding Tools Experts

Brad Brown

Bill Boyd

ray gallant

Are you a RTO Welding Tool Expert? Answer questions, earn points and help others

Manuals & User Guides

Thermo dynamics cutmaster 102 does not fire flashes consumables bad code 85 but it has a new lead and consumables

Add Your Answer

Attachments: Added items

Related Questions:

When we start cutting the sheet with the torch the flame blinks and red indicater (with name D29)glows on the pcb. what is the reason for this.

Display code p=

Thermal Dynamics cutmaster 81. when turned on it cycles blowing air but no arc. two green lights are flashing. pulling the trigger doesn't do anything, air keeps cycling

The exclamation point, the red dot, keeps popping up and it is also red on 85-5.9 and only air is blowing out

I need a new grill for my thermos grill 2 go fire and ice can you help please

Plazma cutter/no arc

I need a grate for a thermos grill to go fire & ice

Plasma cutter problem - is cutting on beveled angle.

Thermos Grill2Go Fire+Ice Problem

Thermos Fire&Ice Grill2Go user's manual

Not finding what you are looking for?

THERMAL DYNAMICS CUTMASTER 102 PLASMA CUTTER 1-1330-1

When we start cutting the sheet with the torch the flame blinks and red indicater (with name D29)glows on the pcb. what is the reason for this.

Open Questions:

flashing red light on cutmaster 102

Related Topics:

Ask a Question

Popular Questions

When i turn on machine

Lotos 520d plasma part not working, arc works great

Where can I find replacement bulbs for an old

Flux wire on Dual Mig Welder not feeding.

Intermittent heat on weller d550 although lights

Top RTO Welding Tools Experts

Brad Brown

Bill Boyd

ray gallant

Are you a RTO Welding Tool Expert? Answer questions, earn points and help others

Manuals & User Guides