Question about Office Equipment & Supplies
I just purchased (only yesterday) an Epson Stylus r270, and I loaded a remote continuous device to feed ink.
The R270, was started to print really OK, with a very good standard, since some photos was appearing not much clear.
So I decided to use the printer functions to clean the nozzle and the print head.
In addition with an absorbent paper, manually I tried to dry from the ink, the black sponge below the head.
I did this operation with the print OFF, but when I made ON, the head went quick against the right side of the printer with a strong noise and the two red light, paper and ink, started to blinking rapidly.
I try to follow the instruction of the Adjustment Program, downloaded from the net, and following the suggestions, to open the right side of the printer to empty the waste (the thank was empty, not one drop of ink was coming out) , the red light was keeping on.
When the red light are on, the green one is off, but the light inside in the left side of the print is on.
With the Adjustment Program, I obtained all the time: ?FATAL ERROR CODE 0 x 50?
And ?CANNOT SEEK CR HOME POSITION?
I would like very pleased if you can help me.
Thanking you in advance,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I have an EPSON STYLUS PHOTO R230 series.. INK and WASTE led were both blinking..i restted it already... but the last one.. i can't reset it anymore.. the printer is indicating and saying "Remove foreign Object in the printer" .. what posible damage it has.?. thank you
Posted on Oct 08, 2008
I may have tripped across a solution to the ink carrier that doesn't want to behave.
I turned the printer off. Then, while holding down the Ink button, I also pressed and held the On button- and kept holding them. Somewhere in documentation I read that this would kick off some process, but I didn't remember what. It didn't turn on right away, but after 4 or 5 seconds of holding the buttons down, started up, went through some motions, and lo and behold, it landed on the spot showing me my cyan cartridge was out. Pressed it again, and it went to the cartridge change position.
I had to think about it, because I was now faced with breaking open a cartridge package worth $35 that could go towards the price of a new printer, and the printer still may not work, but I went boldly forward and it seems to be working fine.
Posted on Mar 04, 2009
Don't use nozzles clean function, besides ink consuming it can cause damages that cannot be fixed: black lines on the back side of the page that will be permanent. Instead put two photo paper together (2x260 gr) and push the two papers together into the printer while printing a motive including many colors. Do so a couple of times and the clogg usually disappears. Good luck! jonk
Posted on Mar 12, 2009
Tips for a great answer:
Oct 26, 2010 | Epson Stylus R290 InkJet Printer
Jun 03, 2009 | Epson Stylus R265 InkJet Photo Printer
Jan 31, 2009 | Epson Stylus Photo R390 InkJet Printer
Dec 26, 2008 | Epson Office Equipment & Supplies
Jun 07, 2008 | Epson Stylus Multifunction Inkjet Printer/...
Apr 28, 2008 | Epson Stylus R265 InkJet Photo Printer
Mar 12, 2008 | Epson Stylus R265 InkJet Photo Printer
Jul 16, 2007 | Epson Stylus Photo R220 InkJet Printer
816 people viewed this question
Usually answered in minutes!