My recording has just disappeared after looking with zero size.

HI,

Please click on below link for user manual:

http://www.fixya.com/support/p144105-olympus_ws_100_handheld_digital_voice/manual-2304

If the file was zero in size then it looks like it was corrupted and was never going to open anyway. Sorry.

How to record voice calls on samsung corby S3653? There is a voice recorder,but it does not function during calls. Which software can I use for recording voice calls?

You have an analog tape recorder, so you need an interface which will allow you to plug it into your computer. This kind of interface is sometimes referred to as a USB Audio Interface. I use a Tapco Link.USB, and it works well, but there are many out there to choose from - you can use something pretty simple, nothing fancy needed.
The interface will plug into your computer via USB cable, and then you will use RCA cables to plug the PMD201 into the interface. When you play the audio on the tape machine, you should be able to select the "USB interface" on your computer as your "input device" and record on the computer. Watch on the computer recording software for input levels (meters that show sound is coming in), and set them to appropriate levels, not too low, not too high (if there is a red zone, you want to flirt with it only on the highest levels) ... don't hit "zero" if your computer shows zero as the peak level for input.

Final Cut Pro is far to complicated for what you are talking about doing. Many computers come with software already installed that will make simple audio recordings like this.

Please feel free to visit my website, rexark.com, for more information on audio and recording, as well as audio presentation and PA systems.

Good Luck!

Solution is very simple - just press DISP/MENU and STOP simultaneously for 2-3 seconds. There will start the FOR blinking on the screen of recorder (ERR will disappear) and the red "eye" on the switchboard. Wait for few minutes and your recorder is back to work :)

Warnning: This means FULL restart and you will lose ALL your recorded data! But I did not find any other solutions...

If the tapes you are using are indeed brand new, then I would assume that the heads on the tape recorder are either very dirty or damaged. Try using a q-tip dipped in alcohol to clean the heads of the recorder. Clean the rollers too and pins that guide the tape. If that doesn't work it may be a component problem. And may be cheaper to replace than repair.

Chances are there to recover such kind of deleted files from your Olympus recorder.

First things first: DO NOT take any more videos or audio with the recorder that you want to recover files from in case you may quite possibly ruin your chances of voice memo file recovery.

Then connect your device to a PC, and have a try of Photo Recovery (also recover audio, voice memos, video files etc), a data recovery program which is good at recovering media files lost. If you are Mac OS X users, turn to Data Recovery for Mac.

Lastly, I hope you good luck. Again you should remember - the more you use your recorder, the less likely you may be able to recover the deleted files back! So STOP using the device ASAP.

find the recording you want
press the erase button (front of the recorder(top left))
after pressing it let it go
then press it again
that recording is then gone
voila

hi

 

nope you cant do that... its factory settings... sorry...