Programming Code for a Toshiba dvd/vcr on a Samsung BP59-00048 universal remote control

Remote Control Support - RCA ' Made for Moments

www.rca.com/support-remotes

RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

RCA Universal Remote Control- Target Programming ...

www.thompsontv.com/rcarc.html

RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

Program an RCA Universal Remote Without a "Code Search ...

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

Remote code for HP BD-2000 Blu-ray player - AT&T Community

https://forums.att.com/.../Remote.../Remote-code...BD-2000.../467...

AT&TDec 2, 2012 - I have an HP BD-2000 Blu-ray player that I recently lost the remotecontrol for. I do not see HP as a manufacturer on the DVD list when I try.

Universal Remote Control Codes List - TV SAT DVR ...

removeandreplace.com/2013/11/10/universal-remote-control-codes-list/

Nov 10, 2013 - We compiled this universal remote programming code list to make it ..... Looking for a code for a orion vcr I have a 5 digit universal remote by rca -rcrn04gr and I ... remote control code (s) for a samsung blu ray dvd player bd-fm51 /ZA ... Please, could someone to give me the code for DENON AVR-X2000.

Programming the RCA RCRN04GR Universal Remote

voxrightnow.custhelp.com/.../programming-the-rca-rcrn04gr-universal-r...

Jul 28, 2010 - Program your Remote. To use this universal remote with your home entertainment system, first you need to program it to control your devices.

[PDF]Rcrn04gr - Universal Remote Control Codes

Hello
Try these codes;
0924 0398

To program the remote, press and hold the TV button. Then enter the 2 digit code from the code list. The EUR7724KC0 will only control TVs from about 17 manufacturers that were manufactured before the remote was programmed. If the given code for the TV brand doesn't work or the manufacturer isn't listed, then the remote can't control that TV. I'll list a few of the codes (see the manual, link below, for more):
Panasonic 01, 02
RCA 03
Samsung 14

The EUR7724KC0 remote came with several devices including the PV-D4734S DVD/VCR. The directions for programming the TV code are on page 28 of that manual. The code list is on page 29. This manual is available from Panasonic here: http://service.us.panasonic.com/OPERMANPDF/PVD4734S.pdf . Since this particular DVD/VCR model was listed at Amazon in 2004, it probably won't work for TVs built in that year or later.

I hope this helps.

Cindy Wells

Hello
Remote codes for Samsung tV with One For All URC 6131 - 6 device remote control are:
0060, 0030, 0178, 0019, 0056, 0032, 0702, 0766
Programming proceedings.

The One For All 6-Device PVR Universal Remote Control

is preprogrammed at the factory to operate an RCA TV,

VCR, and satellite receiver, a Philips Tivo PVR, a Toshiba

DVD player, and a Pioneer audio receiver/amplifier.To

control devices other than the default brands,perform
the following steps; otherwise skip this section:

[*] Turn on a desired device (e.g.,VCR or

DVD player) and, if applicable, insert
media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely

before proceeding.Highlight or write down the

codes and device you wish to program before
starting step 2.

[**] On the remote control,press a device key
once (i.e., TV,PVR,DVD, CBL/SAT,AUD,or VCR).

NOTE: To program control of a cable box or

satellite receiver, press CBL/SAT once.

NOTE: To program control of a CD player or

audio receiver, press AUD once.

NOTE: To program control of a TV/VCR Combo,

press VCR once.After programming, you will be

able to control channel selection, volume, and

VCR functions.

NOTE: To program control of a TV/DVD Player

Combo, press DVD once.After programming,

you will be able to control channel selection,
volume, and DVD functions

[***] Press and hold SET until the LED (red light)
blinks twice, then release SET.

[****] Use the Manufacturer's Codes of device and

brand name and then enter the first fourdigit

code for your device. If performed
correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.

[*****]Aim the remote control at the device and

press POWER once.The device should turn

off. If it does not, repeat steps 2 through 5,

trying each code for your brand until you
find one that works.

NOTE: If the device does not have a POWER
key, press the (Play) key

[******]Repeat steps 1 through 5 for each device you want to control.

OK.

Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Hello
Three digit universal remote control codes for Toshiba are:-

013/ 049/ 089/ 105/ 109/ 117/ 118/ 120/ 159/ 178

Four digit universal remote control code for Toshiba are:-

0159 0178 0109 0120 0181 0105 0049 0095 0170 0260 0358 0394 0924 0012 0095 0117 0141

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

OK.

I can help you reprogram your URC-3220 Universal Remote for your Toshiba TV/VCR Combo.

The Toshiba TV/VCR Combo codes are 1145 & 0845.

Please review my Fixya Tip posts for:

TV/VCR/DVD Combo Codes
Searching for the proper codes, or
Downloading the URC-3220 users manual / owners guide.

I hope that helps.

Programming Your RCA Universal Remote.

The RCA universal remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes: TV-000, VCR-000, Cable Box-000, and AUX is programmed with VCR code 037. For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search: 1- Manually turn ON your device (TV, VCR, Cable Box) 2- Press and "HOLD" CODE SEARCH 3- Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once. 4- Release CODE SEARCH. 5- Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second). 6- Once the device turns off, press and release ENTER. 7- With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists: 1- Find codes for each device and brand below. 2- Press and "HOLD" CODE SEARCH. 3- Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step. 4- Enter the three digit code from the TV, VCR or Cable Box code lists. 5- Release CODE SEARCH. 6- With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists. TV Codes Admiral 005 MTC 011,019,027 Amtron 064 Multivision 081 Akai 002 NAD 018,023 Anam National 038 NEC 011,014,019,027,038 AOC 011,019,027,088 MTC 0017,0023 Bell & Howell 005 NEC 0017,0023 Candle 011,027,033 Panasonic 012,013,038,086 Citizen 011,027,033,064 Penny 000,008,011,019,027,068,086 Colortyme 011,027,084 Philco 006,007,010,011,013,016,019,027 Concerto 011,027 033,035,037,038,043,087,089 Contec/Cony 036,037,040,042,064 Philips 006,007,010,011,013,016,033,035 Craig 064 037,038,043,066,073 Curtis Mathes 000,011,015,027 Pioneer 011,027,045,062,093 CXC 064 Portland 011,019,027 Daewoo 011,019,027 ProScan 000 Daytron 011,027 Proton 011,027,037,072 Dimensia 000 Quasar 012,038,092 Electrohome 006,011,014,027,038 Radio Shack 000,021,025,036,037,059,064 061,068 RCA 000,006,011,019,027,034,038,044 Emerson 011,026,027,028,029,030 046,088 031,032,037,042,053,064 Realistic 021 065,067,075,076,079 Sampo 011,027 Envision 011,027 Samsung 006,011,014,015,019,027,036,037 Fisher 017,021,039,041 077 Funai 064 Sanyo 017,021,039,056,057,058 GE 000,008,009,011,012,027 Scott 028,037,064 038,068,086,089,091 Sears 000,006,011,014,017,018,021,023 Goldstar 003,004,006,011,019 027,039,040,041,051,071,083 027,037,050 Sharp 011,020,025,027,037,052,053,059 Hallmark 011,027 060 Hitachi 009,011,027,036,037 Signature 005,094 040,047,048,063,080 Sony 002 Infinity 013 Soundesign 011,027,033 JBL 013 Sylvania 006,007,010,011,013,016,027,033 Jensen 011,027 035,043,049,066,087,089 JVC 012,024,036,037,040,048,051,074 Symphonic 064,076 Kawasho 002,011,027 Tatung 038 Kenwood 006,011,014,027 Technics 012 Kloss Novabeam 035,043 Techwood 011,027 KTV 078 Teknika 011,019,027,033,037,040,066 Loewe 013 Telecaption 090 Luxman 011,027 TMK 011,027 LXI 000,013,018,021,023,054 Toshiba 018,021,023,071,085,090 Magnavox 006,007,010,011,013,016 Universal 008,009 027,033,035,043,066,087,089 Victor 051 Marants 013 Vidtech 019,027 Marantz 011,013,027,069 Wards 000,005,006,007,008,009,010,011 Memorex 005 013,019,025,027,028,035,043,059 MGA 006,011,014,019,022 066,076,082,089 027,041,056,061,068 Yamaha 006,014,019,027 Mitsubishi 006,011,014,019,022,027,041,055 Zenith 001 056,061,068

OK, here are the Samsung VCR codes, from the orig. remote manual.

Samsung . .. .. .. . 057, 022, 024, 053

HOLD Power Button when slider shows mode of component you want to control.

PRESS 3 digit code (whole still holding power)

RELEASE power button...

To see if it worked, press and release the power button.