HP PSC 1350 All-In-One Thermal Printer Logo

Related Topics:

Posted on Oct 12, 2007

Printer will not power on.

I have been using a 1350 PSC since 2004 & never had any problems until now. The printer will not power up. I have used another power supply and cord.
Checked the outlet and the cover door. The scan light is on but no lights on the display panel. Any suggestions ?

Thanks in advance.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 8 Answers
  • Posted on Oct 12, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Sep 13, 2007
Answers
8
Questions
1
Helped
6121
Points
19

Check to see if a connection is loose to the display.  If not the board is bad and you might be out of luck.  HP pretty much makes these things as "throw away models" now.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Cant find hp psc 1350 on list of hp printers

HP "series" numbering can be somewhat confusing, but Windows 7 does have the correct driver for your printer.
For the HP PSC 1350, you will need to use the 1300 series driver.

The 1310 series driver is for models numbered 131x (e.g., 1315, 1318).
8helpful
1answer

All lights flashing on HP psc 1350 printer

Resetting a Hp printer means switching off the machine, removing the cartridges, disconnecting the usb cable and the power chord, leave it off for few minutes then restarting it again without usb cable connected to it and without cartridges installed. You need to press the power button while it boots up. Leave it one for few minutes and again turn it off. Reinstall the cartridges and plug in the usb cable, again Power On the printer. That's all.
But there's another thing when you say all lights are blinking/flashing, there is chance that there's an internal faulty. Clean the cartridges contact point and the contact points on the printer. If possible, clean the printer thoroughly, including the waste ink tank. This will let you help find out the culprit.
Good luck.
Thanks for using FixYa.
1helpful
1answer

Cannot connect 1350 printer with windows 7

The printer PSC 1350 is not compatible with Windows 7.

We can directly plug and play it to use the Printing Part.
And in order to scan, only way to do is through Windows Application.

There are different softwares and ways to scan, use as per your choice.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01884960&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
0helpful
1answer

Where can i find a power cord for my hp psc 1350 all-in-one printer, im based in the uk, so must be suitable for uk power outlet, cant find one anywhere.

1 Use the original power cord which came with the printer. All you have to do is to go to any of the electronics shop in your area and get the multi socket extension cord which can be plugged to UK power outlets. Connect the printer through this.
0helpful
1answer
0helpful
1answer

Psc 1350 all-in-one

try using it on one computer only, then u wil know if there is a network problem.
Not finding what you are looking for?

60 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6677 Answers

k24674

Level 3 Expert

8093 Answers

Marvin
Marvin

Level 3 Expert

85242 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...