Posiflex CR 3100 Hi was just wondering if some one could tell me the wiring for a 6 pin telephone plug on the end of these cash drawers whom ever had it before me butchered it and changed it to a four pin now it wont run off my posiflex pp700 printer
warm regards
simon
If you have the following pairs of wiring:
Blue/White - White Blue
Orange/White - White/Orange
Green/White - White/Green
Then the pairing starts as follows:
Pin 3 - Blue/White
Pin 4 - White/Blue
Pin 2 -White/Orange
Pin 5 - Orange/White
Pin 1 - Green/White
Pin 6 - White/Green
If your wiring has different colors, please let me know and I get you the correct wiring plan.
Don
The configuration you are describing does not sound like a standard phone cord connection.
Are you sure this for your phone. Can you send me a picture of the connection?
Symon,
I can't find a phone connector fornthis cash drawer.
However, I did find this document:
http://220.228.151.13/upfiles/CR3X01-3X0...
I'll bet that you have an RS 232 port and not a phone line.
That would make some sense concerning the jumpered connections.
Can you please put a picture of the connector and plug that you have on the unit?
If not, please send the pictures to [email protected].
×
1,148 views
Usually answered in minutes!
Hi Don i only have 6 wires coming from the cash drawer they are wired to a small connector then connect to a pcb board at the rear of the drawer, the connectors from top to bottom the wires are white blue black red green yellow the white and blue seem to bridged with a blob of solder as are the green and yellow there are also two seperate wires coming off the board leading to the solonoid
many thanks
simon
×