Sony KP-41T65 41" Rear Projection Television Logo

Related Topics:

Posted on Oct 11, 2007
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Sony kp-46s4u Hi i have a rear projection television,The problem is it powers on fine but the green tube has a large bow on top and bottom of the picture.I have used engineer mode and i can ajust everything but the Green Vertical like in RGV menu cent, skew,bow,size etc.However in VSP i can ajust vpos,vlin,vsiz,and vsco. But i still have this very large bow top and bottom. I have replaced both STK's (STK392.040) If anybody can advize me i would be greatfull.Please Help.

  • G7VZQ Oct 17, 2007

    Found resistor fuse had also blown now replaced all is fine and working ok.

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Champion:

An expert who has answered 200 questions.

  • Expert 375 Answers
  • Posted on Oct 28, 2007
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Champion:

An expert who has answered 200 questions.

Joined: Aug 18, 2007
Answers
375
Questions
0
Helped
88431
Points
559

Look in hte convergence circuit for opened reistors.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi can any one tell me where i can find the resistor fuse on my sony kp-46s4u. Thanks! Tim

U talking a whole convergence kit?Buy the whole convergence kit at websites Tvrepairworld.com,Tv repairkits.com
0helpful
1answer

2001 Sony KP-53V90 53 in. Rear Projection Television has a problem related only to the picture, the top and bottom of the screen are bowed into the middle, the video feed label and volume scale are also...

This is probably the notorious "light engine" problem that all of these Sonys of this design run into sooner or later. It is usually more expensive to repair that what the TV is worth, sadly. A Sony authorized repair center can confirm this.
0helpful
1answer

I have a 53 in. sony projection tv,. bowed picture tubes?!?

Replace Both STK convergence ICs will have part number on them STK392-560 use same part number on your STKs. Also around ICs ck pico fuses 5/6amps they are green or yellow.
0helpful
1answer

KP-61HS30 Sony TV turn pink and green text is bowed

Hi,

Check out CONVERGENCE GALLERY . If you see your symptoms you have a problem in your convergence amplifier circuits. Typical Sony Convergence repair requires disassembly for replacement of 2 ICs, sometimes a fuse or 2, then TV is like new.

It is much more complicated than changing batteries on your remote. Many consumers try unsuccessfully to do a convergence repair. I recommend finding someone competent to do it for a reasonable price. Typical repair shop charges may be from $400 to $650.

If you are in the Calgary area, call me. More reasonable rates.

easyab
0helpful
2answers

Sony kp-53s35 bowed picture on top and bottom

Good day, scotty1980;
Scotty, welcome to 2008. Hold onto your wallet, the has a convergence problem. Which means that the TV's convergence IC's are more than likely bad. The average cost to repair is about $450.00. Unless you are electronically friendly, I would call an authorized service dealer for repair.
Good luck, big IRISH. PS; Hope this was helpful.
0helpful
1answer

KP-46S4U lose picture after a few second blink of brightness

does the from led blink if so how mant times pause then blink again?
0helpful
1answer

Bow in the green tube, what is a reasonable price for repair

Your problem as well as your freinds tv is nota cronic problem with only Sony TVs but with every rear tube projection set ever made. The convergence ICs mostly go bad and yes, sometimes, a cold solder connection on the main convergence board can cause these problems. The IC's should be replaced as a pair as that takes care of problems your going to have down the road with the other colors going funky. A normal repair , depending on the area your in should run about 250.00 up to, but no more then 400 bucks. Good Luck
Not finding what you are looking for?

174 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...