HITACHI 53" PROJECTION TV 53FDXO1B

Replace the two STK-392-110 OR 150 CHIPS IT USES AND ADJUST SET IN DECAM MODE

Replace the light, check for blown or poped capacitors and resistors on the circuit board. Pliz vote if it works, good luck.

my hitachi projection tv 53uwx10b screen is black with no sound or picture when the power button is on

lupe0112,

I'm no expert, but I think that you have a problem with the convergence of the 3 color guns. I've been working on a similar problem. As a first step, have you tried "Magic Focus?" The Magic Focus button for the Hitachi 53UDX10B is at the left of the small front panel controls that also include your RCA composite and SVideo connectors. Let the set warm up for about 20 minutes (as recommended by the user guide), and then press the Magic Focus button. When you press the Magic focus button, the set will auto align the 3 color guns. If this doesn't fix your problem, unplug the TV for at least 4 hours and try again.

Good Day, hayzlett;
Remote control unit, part number HL01643; CLU-5713TS1.
You can purchase this locally.

Good Luck, big IRISH.

the picture turns blue because the blue crt stop working you 'll need a tech

Call the 800 number with the new remote. Sometimes they will have additional codes. Or with the instructions with the new remote you can manually get it to work. You must follow instructions carefully. Look for this section in the instruction booklet

Roger,
Could be as simple as a software upgrade if the picture looks okay after it come on... What software version are you currently running?
SOFTWARE VERSION CHECK Step (1) Turn the TV ON. Step (2) Using the TV Remote, Select Antenna C. Step (3) Press the MENU button on the Remote. Step (4) Menu will appear

(Figure 1)
Step (5) Press the Cursor Down button and Highlight SETUP

(Figure 2)
Step (6) Press SELECT on the Remote Control. Setup Menu will appear

(Figure 3)
Step (7) Cursor Down and highlight UPGRADES

(Figure 4)
Step (8) Press the SELECT button on Remote Control. Upgrades Menu will appear

(Figure 5)
Step (9) Read the Software Version
(Figure 6)


Let me know!
Bill

KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

most tv shop's will replace convergence ic's,which your tv needs.Thepart number is stk392-180 very common You need 2 plus poss resistors,3 bucks apiece