SOURCE: Web password
You probably have a network card called a IB-30 installed. You will need to reset this card by changing the jumper from is original position to the next one. This will restore the original factory settings, there are only one jumper on the card. If you still have the CD your IB-30 came with it will explain to you under troubleshooting how to restore the factory defaults.
SOURCE: CS-1820 admin password reset.
The master user name is 1118 and password 1118 also. this should give you access to the menus and allow you to do whatever changes you feel like.
SOURCE: Need to reset password in Kyocera Command Center f...
The only way to reset the password, is to use the Paramter "U 24". Thus the harddisk will be formatted!
292 views
Usually answered in minutes!
×