Model 44860 touch screen

Question edited for clarity.
Question moved to Hunter.

Page 74 of the manual refers.

Hunter 44860 Installation And Operation Manual - ManualsLib

https://www.manualslib.com > ... > Thermostat > 44860
View and Download Hunter 44860 installation and operation manual online. Touchscreen Programmable Thermostat. 44860 thermostat pdf manual download.

..

The first thing to determine is if in fact the problem is in the thermostat or if the problem is in the furnace. The furnace typically provides the power source for the HVAC control system and if nothing is wanting to come on, the power to the furnace could be interrupted. Verify that condition first.

Remember most programmable thermostats have a built-in time delay possibly as much as 5 minutes and that is a long time to wait without pressing or touching another thermostat function.

1. From the Home screen, touch the All apps icon, and then touch the Settings icon.
2. In the Personal section, touch Backup & reset . Figure 1: Backup & reset
   
   
3. Touch Factory data reset . Figure 2: Factory data reset
   
   
4. Touch Reset tablet .

sir/mam First check the right side cover where the image unit is located. Check the two latches that latch that door are not broken especially the rear one. Then get a paper clip and stick the clip in the small hole on the right side of the control panel it will touch a switch. The control panel with go thru some screens when you see the screen with copiers on it on the left side of the screen in the middle you will see a small "." when dot appears touch 3 button. Then the machine will continue to the code screen. Press the utility button should see a new button "Maintenance Mode" touch it then touch trouble reset. The machine will again go thru screens will see the"." again do nothing. Should go ready to Copy. If the code comes back do not reset you are messing with the Fuser the Hot part continue reset without a technician looking at and or replacing it can catch on fire that would ruin a perfectly good day

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

mam/sir First check the right side cover where the image unit is located. Check the two latches that latch that door are not broken especially the rear one. Then get a paper clip and stick the clip in the small hole on the right side of the control panel it will touch a switch. The control panel with go thru some screens when you see the screen with copiers on it on the left side of the screen in the middle you will see a small "." when dot appears touch 3 button. Then the machine will continue to the code screen. Press the utility button should see a new button "Maintenance Mode" touch it then touch trouble reset. The machine will again go thru screens will see the"." again do nothing. Should go ready to Copy. If the code comes back do not reset you are messing with the Fuser the Hot part continue reset without a technician looking at and or replacing it can catch on fire that would ruin a perfectly good day

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

My Hunter 44860 is doing this also. It started on Nov. 1, 2009. It also displays the day of the week as "SUNDAYAY" when it hangs. I believe this is a firmware problem with older stock. Unfortunately I bought it from Lowes this fall and lost the receipt. I am going to try to return it to Hunter Fan Co for an exchange.

"Hunter" says it all. Throw it out and buy a honeywell, robertshaw, or a white-rodgers. Hunter stats are notorious in the business as being problematic.

The following are instructions for calibrating the Leapster™ handheld.(1) Insert a cartridge, turn the unit on and wait for the sign-in screen to appear.(2) Hold down the Home, Hint and B buttons simultaneously.(3) When the screen changes, press the A button.(4) Using the Stylus, touch the center of the targets.

code 570 works

http://www.hunterfan.com/uploadedFiles/Support/Owner_Manuals/44002.pdf