53UDX10B 53 in. Rear Projection "3D vision"

Our TV today looks like it's projecting in 3D - the top and bottom of the screen have double vision (red and green) and the duplicate image at the top is slanted. It almost looks like a projector got detached inside and is projecting askew. Is that possible? Any advice/suggestions?

Thanks

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
2 Answers

I had the same problem with the same model earlier this year. You need to have the convergence module replaced on a circuit board inside. Expect to pay $400-$500 to a qualified repair shop.

Posted on Nov 03, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I am getting a warped 3d look at the top left side of screen and now am getting it also along the botttom of screen also. i am also having the tv kick out and the red on light blinks but when i go up to tv...

Tv have colors lines R,G,B mis alignment 3d picture.The tv convergence board it dead.The convergence board require changes 2 STK convergence ICS and some or all it resistors.The shop will cost u $300-350 for parts and labors.

Read full answer

Aug 25, 2010 • Hitachi 53UDX10B 53" Rear Projection...

0helpful

1answer

Hitachi projection tv 53uwx10ba - the Convergence ICs were replaced. When the PDKP bridge between convergence board and 2nd board is plugged in, it makes a noise. Kept that unplugged, the picture is...

Did set have this problem before you replaced the STKS?

I know these sets very well. If problem is different in any way from before you replaced chips.......double check all soldering or one of the new chips may be defective.

The more you tell me the better I can help.

regards, SD TECH

Read full answer

Aug 18, 2010 • Hitachi 53UDX10B 53" Rear Projection...

0helpful

1answer

Curved double image at bottom of TV and looks like a 3d image

Projection TV

sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

Screen Looks 3D
Colors wont align
Screen may look distorted
No Audio/Video - TV makes a chirping sound.

Problem #2 CRT Fluid has clouded over. Symtoms

Dull looking video
White looking video
Halos around objects
Red/Orange looking video

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Read full answer

Mar 03, 2010 • Panasonic PT-53WX53 53" Rear Projection...

0helpful

1answer

Hdtv that has double vision

There are two common problems with these sets.

Problem #1) Convergence

Symptoms:

Screen Looks 3D
Colors wont align
Video may look distorted

Problem #2 CRT Fluid has clouded over. Symtoms

Dull looking video
White looking video
Halos around objects
Red/Orange looking video

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Read full answer

Oct 23, 2009 • Hitachi 53UWX10B 53" Rear Projection...

0helpful

2answers

Double on picture

Ur Convergence is dead.U know how to solder?Buy the convergence kit use the parts and desolder and resoder repair.Tv Repair World.com to buy.

Read full answer

Sep 11, 2009 • Hitachi 53UDX10B 53" Rear Projection...

1helpful

1answer

I have triple vision going plus it has started to

This is a common problem. Your convergence has gone out.

Common symptoms are...

1) 3D Video
2) Warped Video
3) Convergence menu does not adjust the red or blue correctly.

Go here for a solution...

http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Read full answer

Sep 05, 2009 • Hitachi 53UDX10B 53" Rear Projection...

1helpful

1answer

Hitachi rear projection double image goes away when tapped

Your convergence chips are bad. You can set a repair kit from www.TvRepairKits.com for your model. Their kits come with all the parts and a complete photo instruction guide.

Read full answer

Mar 29, 2009 • Hitachi 53UDX10B 53" Rear Projection...

1helpful

1answer

Our television suddenly lost its colour alignment

Sounds TV got problem of convergence IC failure and you need to replace two ICs in convergence section.
If you are familiar with TV repair and have soldering tools then can fix it by yourself or ask help to local TV tech.

Read full answer

Mar 17, 2009 • Hitachi 53UDX10B 53" Rear Projection...

0helpful

2answers

Convergance problems?

did you adjust the convergence
on the menu?

Read full answer

Jan 11, 2008 • Hitachi 53UDX10B 53" Rear Projection...

0helpful

1answer

53UDX10B 53 in. Rear Projection "3D vision"

the convergence IC`s and associated resistors have to be replaced, do not repeatedly push magic focus or the alignment after the parts change out will take longer which of course means higher repair bill, good luck

Read full answer

Nov 10, 2007 • Hitachi 53SDX01B 53" Rear Projection...