Question about Philips Magnavox 51MP392H Rear Projection Television

1 Answer

Green screen My Name Is Dimitri and I have big screen model #60PP9363H/17 and the pic is turning green from the bottom of the screen also the words and numbers are coming in doubled and blury. can u give me some advise on how to repair this problem. thank you In advance for your help.

Posted by demaan on

  • gabbie0812 Dec 29, 2007

    I have a philips 60PP9363H/17 and was told the convergence is probably out on it. I cannot seem to find the parts to fix this problem. Can anyone help??

×

Ad

1 Answer

Jem

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 212 Answers

It sounds as thought the lower light strip has malfunctioned & blown the red/blue LED lights leaving only the green bulb functioning, I would ring the makers repair team for a repair if it's under warrentee or a repair quote, if warrentee has expired, from my personal experience showed me that a new TV is cheaper. I hope this helps.....

Posted on Feb 21, 2018

Ad

5 Related Answers

Anonymous

  • 3130 Answers

SOURCE: color on my big screen tv

sounds like you need to have the two convergence IC's replaced. These are soldered on the main board. Good Luck

Posted on Jul 17, 2007

Ad
ctf1800

Cary Farah

  • 4402 Answers

SOURCE: Philips 60 inch rear projection t.v. model number 60PP9363H/17

http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Posted on Dec 19, 2007

Anonymous

SOURCE: Philips HDTV model 60PP9202/17F

put ajax on it it will fox thianks hun

Posted on Jan 12, 2008

chris07551

  • 726 Answers

SOURCE: big screen out of focus

ok you have to open the tv intill you see the 3 bulbs and the big mirror
the around each bulb is a wheel u have to turn that for the pic and focus

Posted on Jul 20, 2008

Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: Phillips hd projection tv/ model 60pp9363h/17

thats a common problem with all projection tvs. You will need to replace both convergence Ics and 4 resistors. You will need two STK392-120 Convergence ICs and four 6.8 ohm 1watt resistors. You can get replacement parts at the following link and they provide free instalation instructions so you can do the repair yourself. heres the link.
http://servicemanuals.vstore.ca/

Posted on Sep 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my Philips 347H E10839 have no picture,chirps like a bird when I turn on?


thats an error code its beeping. sounds like capacitors on psu. google the beeps I.e 3 long one short

Sep 19, 2014 | Televison & Video

1 Answer

Dptv335 model number#60pp9363H/17SAM Mode Green Convergence


Your Green CRT is getting Mold in the glycol. This will get worse. You need to drain the glycol out of the crt and clean, then apply new glycol to the crt. You should do the blue one also, because it will go next. The Red can can be left alone.

Mar 20, 2013 | Philips 60PP9363 60" Rear Projection...

3 Answers

SOUND BUT NO PICTURE


is it nothing on the screen at all? if so your projector bulb blew. they usually cost a coupole hundred bucks

Mar 07, 2009 | Philips 60PP9363 60" Rear Projection...

1 Answer

Philips 60pp9363h/17


You have a convergence problem. Here are some of the most common symptoms. 

Screen looks 3D
One or more colors can't be adjusted when using the convergence menu. 
Screen is bowed in but stationary.

Solution: 
You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kit for your exact model. The kit includes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc. Everything you need to fix it yourself. 

Hope this helps,
Ed

Sep 09, 2008 | Philips 46PP9302 46" Rear Projection...

1 Answer

Phillips hd projection tv/ model 60pp9363h/17


thats a common problem with all projection tvs. You will need to replace both convergence Ics and 4 resistors. You will need two STK392-120 Convergence ICs and four 6.8 ohm 1watt resistors. You can get replacement parts at the following link and they provide free instalation instructions so you can do the repair yourself. heres the link.
http://servicemanuals.vstore.ca/

Sep 01, 2008 | Philips 46PP9302 46" Rear Projection...

7 Answers

Picture is warping and colors are seperating giving a picture that looks like a 3D picture without the glasses


you need to replace both convergence Ics. Post the model number of your set and I will post the correct IC numbers as well as alink where you can get replacements with free instalation instructions. Respond to this same post so I will have access to your symptoms when you post the nodel number.

Jun 30, 2008 | Philips 46PP9302 46" Rear Projection...

1 Answer

Philips 60 inch rear projection t.v. model number 60PP9363H/17


http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Oct 26, 2007 | Philips 60PP9352 60" Rear Projection...

2 Answers

Color on my big screen tv


sounds like you need to have the two convergence IC's replaced. These are soldered on the main board. Good Luck

Jul 16, 2007 | Philips 46PP9302 46" Rear Projection...

Not finding what you are looking for?
Philips Magnavox 51MP392H Rear Projection Television Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...