SOURCE: OCR Software compatible with umax scanner
you can download a driver from here Umax PowerLook 2100XL 4.50 Driver Download
hope this helps
regards
riz.
SOURCE: I have a Umax 2100XL scanner that is SCSI. I just
Hi ,
If you have the W XP install disc , you can install a virtual version of W XP on your machine from http://www.vmware.com/products/player/
If you still have the install disc , you can also partition your primary and install W XP on the new partition from http://download.cnet.com/Partition-Wizard-Home-Edition/3000-2094_4-10962200.html. Easy and safe , no specific knowledge required .
I don't see any other way .
Regards .
SOURCE: I have an UMAX Powerlook
there are some Firewire to SCSI and USB to SCSI adapters that should work- check www.hamrick.com. Ed Hamrick has written Vuescan scanning software that will work with the 2100XL, windows 7 and many of these adpters
SOURCE: Umax PowerLook 2100XL - Driver
Go to
this download page on the UMAX site
and select your device (Scanner), then your scanner model (Powerlook 2100XL) , and your operating system, then press the "SEARCH" key.
Each page in the Download Area is in two languages - first German, then English, so page down to the English section.
Follow the instructions to download the correct driver for your scanner / operating system combination.
Note there is currently no driver available for Windows Vista.
When you've tried this solution, don't forget to rate it !
Good Luck.
SOURCE: how tha scanner instaled?
hi,
1. connect the scanner usb cable to your desk top
2. install your scanner driver (cd of your scanner) to your computer.
3 as you put the cd in your desk top computer it will give you guide line (just follow it)
thank you....
266 views
Usually answered in minutes!
×