I need help in securing my router

Hi Kmweidows,
If you want to get the Network Key or Security Code you need to access the Wireless Settings Page of your Router. To access your router just open a Browser then type 192.168.1.1, Username is admin password is admin. Go to the WLAN Settings Page and go to Security. Personalize the Passphrase, Network Key or Security Code so that you can easily remember it.

Rate me if this helps so I can help others. Thanks for using Fixya.

to secure your wireless register for www.opendns.com it can help secure your router wireless internet try it now

goto router ip

192.168.1.1
admin login

admin :blank
password:admin

wireless setup
wireless security
enable wep wpa
wep 10 digit
wap 8 alpha numeric

You can find everything you need to know from here:

http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G

You basically setup your own security. If this is a pre-configured router and you do not know the access information, then you may need to reset the router back to factory and then configure it from scratch. While you are at it, download the latest firmware and update your router for best performance.

Security Code is configued in Wireless Router itself.

Please open your Wireless router Admin Panel in Internet Explorer. Please follow this steps.

1. Open Internet Explorer and type : http://192.168.x.x and press enter (x is router IP. Generally its 1.1 or 0.1)
2. Go to Wireless Security Tab and look there for Security code.

Now type that Security code in your Ps3 .

You find all details regarding to access router in internet explorer from Product Manual. (you can download product manual from Manufacturer site)

You will need to secure the wireless network. that means you need to put a password on the wireless network. Once you secure the wireless network, no one will be able to get online using your network.
To secure the wireless network, you will need to open the router set up page. on this page you will find all the wireless settings of the router.
Before changing any wireless settings on the router, make sure that your computer will be connected to the router.
If you do not have any computer connected to the router,then you will need to connect the computer to the router with the cable.

Click here for easy steps to secure the wireless network

You want to secure the wireless network.
Is there any computer connected to the router with the Ethernet cable?
If not then you will need to connect the computer to the router with the cable.
Check the IP address on the computer. Open the router set up page.
Once you open the set up page, you will find the option to make it secured

Click Here for step by step instructions

You need to setup the wireless security ON on the router by loggin in to router setup page for that you need to connect the router with a ethernet cable with the computer or laptop and open the router setup page with router IP in internet browser, if you can tell me the model number of the router and brand i can give you step by step process to setup the security on the router.
on selecting the security as any apart from none the light comes on

Let me know if this will help

Regards

Using your wired computer, open the router's setup page using Internet Explorer or any browser and type http://192.168.1.1 to open the router's admin page. Go to Wireless tab, then wireless security sub tab. Choose WPA for security

On the back of your router there is a reset button, hold it down for 3o seconds or so, this will reset the router back to factory settings, the default user name and password would be admin, note that sometimes with the belkin you only need the user name and not the password. Usually you need admin/admin though.

The default IP address to access the router when its reset is 192.168.2.1

Hope that helps