Hello, my tv is about 3 years old. Have had no previous issues with it. We were watching it 2 days ago and the screen went blank. I turned it off, unplugged it, waited a few minutes and plugged it back in. When it first came on it had a red, blue and green line across to screen about 8" from the top. When the picture comes on, it is now in 3D, curved and there are 3 images of everything - 1 in red, 1 blue and 1 in green.
Any suggestions as to what has happened and what is necessary to fix it? Thanks for your input. T
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert who has answered 200 questions.
Re: RCA Projection TV Model HD61W66
Convergence power supply not working , there is a mini fuse close to the flyback thansformer , 400miliamp at 250 v resolder the flyback and replace this fuse , there is 3 fuses it look like small squer brown color is the one on the middle , normal repair $200 - 300
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have a 2000 model RCA P52923 and I had the same problem occur a couple of days ago. The sound hasn't worked for a couple of years, but the TV is connected to an RCA surround sound to resolve that issue. Most recently, while watching TV, it began to start scanning channels by itself. I shut it off and unplugged it for a couple of days, but each time that I turn it on, it begins to immediately start scanning each channel. Neither the remote, nor the channel buttons on the set are able to stop the scanning, and neither of them will perform any functions, including turning the set on and off.
Any advice would be greatly appreciated.
The cost about $300 parts and labors.U can do the repair ur self about $100,but require ordering the parts in the net.Must take the tv aparts.Have to desolder the parts,put in the parts correctly and resolder it.This website for the Net ordering parts.Tv Repair World.com.
This is a bad sign of video board backlight going to failure.Make sure u get a warrenty repair,make sure they replace video backlight board.Or exchange the tv.U got a bad IC U could call the CPU for the board.It have intermitent ground sort.U can unplug the power,replug the power,it will work,but this temporally fix only.The high power of the board will kill the IC sooner or later.
Ive had a similar model since 2002 and it had the same problem. Factory power supply to weak for the model. Mine was replaced twice before the upgrade came out. Sorry, I dont think it is a $.50 solution.