- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It would be helpful to have the model number for your 3-in-One remote. However, most of the codes are common for your Apex DVD player. These are codes a RadioShack Remote for an Apex DVD player. 0672, 0717, 0755, 0794, 0795, 0796, 0797, 083. Press the button for DVD on your remote. Then press and hold the Program button until it blinks. then, enter your 4-digit code, after entering, the Program button will blink. Aim the remote at the DVD and press the Power button on the remote. If the DVD turns off, then the remote is programmed for the DVD player. If not, repeat instructions and enter another code, until one is found that will turn off the DVD when the power button is pressed.You can also download an owners manual from RadioShack.com with the model number of your unit.
Hello With a universal remote control, we can't get allthe functions do work as its orginal one. You have to check other codes for Apex, described in its user manual. Check other codes, and see which one will do best to get most functions with the TV. OK.
I don't have the original control remote for Apex Ad-1201 DVD player. I would like to use my Universal Remotes: Radio-shack USA "flag" 4-IN-ONE Remote and / or RCA 312W three component remote. I got the codes from the manuals but my DVD player doesn't work or turn off (only ejecting; open and close) with pause button. Could I get a possible code (s) for these Universal Remotes?
If you tryed the manual search and it did not find any, I'm afraid this remote is not compadable with this unit. What happens when you gop into a manual search is the remote will go to each code, one by one, until it(the remote) goes to the end of the list that is programmed into itself. There simply is not a code for this unit. Unless it is a learning remote, where you can pporgram into or teach the remote from the original, I am sorry to say you will need to get another remote that has the right codes programmed in it.