NO SOUND ON THE FIRST FEW MINUTES OF RECORDING IT DO RECORD WELL, BUT ON THE FOLLOWING MINUTES, SOUND DISAPPEAR AND WONT PLAY ON WINDOWS MEDIA PLAYER. EARLIER THERE WERE TIMES THAT THERE WERE STREAK OF BLUE LINES THAT APPEAR ON MY RECORDINGS. DONT KNOW WHAT TO DO. PLS HELP

To start voice recording, follow these steps:

1. Press the Menu button to return to Main Menu.

2. Select Voice

3. Press Play/Pause to start recording.

4. To pause recording, press Play/Pause again

5. To stop recording, press Select. A pop-up window will appear on the screen. Select Yes to

save recording. The recording will be saved in the RECORD/VOICE folder.
6. Press '<< button to return to the Voice Menu.


Please leace feedback

Cheers

Andy

If the recording you made is not in a mp3 file format then the player cannot play that song/music.
To convert music files and CDs to play on a MP3 player, please click on this link and follow my instructions :-
Normal 0 http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

DSC-S930 does record sound and you can hear video clip sound by playback of Media Player in Computer.
This camera does not have inbuilt speaker for playback sound but it have inbuilt mic to record sound, transfer recorded movie clip in computer and play it with media player to get sound and picture.
Hope this info will help you.

Press STOP to stop recording.
Click "save" and save the recording to a file in your "My Documents" folder.
Open your "My Documents" folder.
What is the "size" of the file?
Click with the SECOND (usually the RIGHT) mouse-button on the file, and click 'Play' (with Windows Media Player).
Does it play?
Does Windows Media Player show the correct length (minutes:seconds) for the recording?

Audio files need the right codecs to play them. Windows media player generally needs these to be added. Download the K-Lyte CODEC pack from the Major Geeks website. Always use the advanced mode when installing them, as they do like to change your browser settings or change your browser completely if you do the normal way.

I have seen this on other players as well. What happens is the media your recording on is either too slow for the player and the player is recording faster than the media is supposed to handle. For some reason it works on the machine it was recorded on but nothing else.

Solution: Get media that matches the speed of the player.

If this is not the solution let me know I will get you one.

Rob

I have a coby mp-c855. I record my own voice by the following: hold the M button for a few seconds, scroll over to record and press play to start your recording and pause to end. To listen to your recordings in the future: use M button, choice voice options and press play. I have not figured out how to delete my voice recordings yet.

There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor