Can you by pass the parking brake on the alpine iva-d106?

take a look on ebay

Im guessing that if you can hear sound but have no picture and this is newly installed that your unit is wired to your parking brake as a safety feature. You need to disconnect it and connect the wire to the radio ground to bypass it.

Pink wire is generally the parking brake safety. If you dont want the dvd player to play video while in drive wire it to the ground on your parking brake sensor wire. If you do want it to play video while your driving, wire it directly back to the ground wire on your stereo.

To connect the iva-d106 with the kce-400bt you need another cable

the way u have it formated on the ipod might have something to do with that.

check the screen configuration using the visual button on the top right side of the screen, you should disable the "OFF" button

remember it is illegal and dangerous to drive with video on in front seat.
Not sure what model, but most likely this will work. Radio Shack will have parts.

If its for an Alpine there are 2 switches needed.
1. A toggle to simulate e brake
2. A momentary (push button-PB)simulate the regular brake.

Both switches should go to ground, if I recall. If not put 12 volts on PB switch.
Procedure is as follow press regular brake(PB) and hold. Turn toggle on off and on again, release PB

Let me know if you have more questions

Was this unit recently installed. Has it played before. Be sure that the wire to the parking break is also connected. These dvd players will not play if the brown wire is not connected to the grond side of theparking break. If you need more info, please feel free to ask.

based on my previous experience with the Alpine Mobile Multimedia Station, 1 wire needs to see 12 volts ie. brake light wire, the other needs to see ground ie. parking brake.

You can hook up the wire that needs 12 volts to either ignition or some other 12 volt source. The other wire needs to be connected to a toggle switch to ground. Then flip the switch as needed to simulate the parking brake and voila...

Parking Brake Lead (Yellow/Blue) Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the IVA-D310.