Front loader will not spin out cloths. Flashes errors sometimes.

387780 does not seem to be a valid model number.
If you can locate the model number enter it here at sears Parts Direct.
Parts for Brands Craftsman GE Kenmore Whirlpool and more

Link to videos about washer not spinning.
top loader kenmore washer won spin YouTube

It's time to unplug the power and let the electronic panel reset.

Ours doesn't even spin. I'm trying to connect with a repair guy.
If we gets our repaired, I'll try to remember to get back to this page.
Good luck with yours.

Hi, I have the same washing machine and it flashes UE on the error code during spin cycle when I have one thing in there, or if the clothes are uneven. I usually have to wait until the lock light goes out, re-arrange the clothes and continue spin cycle. If it is just one item in there, I usually have to manually wring it out as it will keep saying error if I keep trying to spin.

It sounds like your tub bearing is bad or going bad. It could be the adjustment on your spin cycle. Does your unit allow you to adjust this. Also are you overloading. Can you send me the brand and model of your unit and I help you more.
JimmyC

The pressure switch is mis-reporting the water level to the ECU.

Test/replace the pressure switch.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

There is an awesome guy on fixya with this:

http://www.fixya.com/support/r622155-kenmoreelitewhirlpoolduetdoorjammed

http://www.fixya.com/support/r615354-fherrorcodewhirlpoolduetkenmore

is it top load or front loader kenmore what

Kenmore Ellite Dryer - Model 110.73952102 Type DDOT - NAT 1206006 - EH22

The Heat does not turn on! It spins and spins but no Heat? Any suggestions and how to fix intructions would be greatly appreciated. Thank you!

I have exactky the same problem Replaced the drum and now it will not final spin, I touched nothing else.Can't figure what could be wrong,speed board too sensitive?
It worked fine before the bearing went.
Any ideas?