Unable to adjust the tint

I called Element TV they said the Tint adjustment/controls on most Digital Element TVs are programmed for "Non adjustment"with digital signals:
On Large Element TVs , the "Tint" controls are used only for Analog Video and for NTSC viewing, but the controls are inoperative or blanked-out when watching PAL or SECAM digital signals (my is HDMI directly from Digital cable box).

you need to go into on screen menus and scroll to the video settings and adjust there

if there is no button for menu on front then you should write sony for a replacement remote as most aftermarket replacement remotes dont do the setting functions you are looking for

good luck - hope this helped you

Hello

The Tint function can be accesed by the following steps.

The PICTURE menu offers options to enhance and refine the picture displayed on your TV based on ambient room light and personal preferences. Adjustment options include contrast, brightness, color, sharpness and color temperature

Press the MENU button on the remote control. Navigate using t u arrow buttons to select PICTURE. Press the down q arrow button to highlight PICTURE MODE, then press the u arrow button to select your viewing preference from 4 factory options:
STANDARD > DYNAMIC > MOVIE > PERSONAL. The STANDARD setting is recommended for most viewing environments. Depending on the ambient light level in the room, you may find one of the other options more pleasing.

To make more critical adjustments based on your own preferences in PERSONAL:

• Use down q arrow button to highlight Contrast. Navigate using the
t u arrow buttons to increase or decrease contrast intensity.
• Use down q arrow button to highlight Brightness. Navigate using the t u arrow buttons to increase or decrease overall brightness.
• Use down q arrow button to highlight Color. Navigate using the
t u arrow buttons to increase or decrease color intensity.
• Use down q arrow button to highlight Tint. Navigate using the
t u arrow buttons to adjust colors toward green or reddish tint.
• Use down q arrow button to highlight Sharpness. Navigate using the t u arrow buttons to soften or view crisper edges in the picture.
• Use down q arrow button to highlight Color Temperature. Navigate using the t u arrow buttons to select COOL (more bluish tone), NORMAL or WARM. The default setting is NORMAL. WARM mode will provide color that is calibrated to D6500° Kelvin, the standard color that broadcast stations and the Motion Picture industry consider as the most accurate to view programming.
Note: When adjustments are completed, you may select another menu by pressing the Menu button.
OK

The best way is to just unplug,replug the tv back like an hour later.The tv setting and colors,will automaticly,return it to the Factory tv setting.

To adjust the display settings:

1. Press the flywheel control. The main menu appears.

The current display settings appear across the top of the main menu.

2. Rotate the flywheel to highlight an option. The name of the
highlighted option appears in the center of the menu.

3. Press the flywheel control to select the highlighted option, then
rotate the flywheel to adjust it.

Some options can only be enabled or disabled. There are also some
options that contain additional menus.

4. Repeat Steps 2 and 3 until you have made all your changes.

5. Rotate the flywheel control until Exit is highlighted, then press
it to exit the OSD control system.


OSD OPTIONS:

Contrast increases or decreases display image contrast.

Brightness increases or decreases display image brightness.

Horizontal Size increases or decreases the width of the display image.

Horizontal Position moves display image to the left or right side of
the screen.

Vertical Size increases or decreases the height of the display image.

Vertical Position moves display image to the top or bottom of the
screen,

Pincushion curves the sides of the display image inward or outward.

Trapezoid increases or decreases the trapezoid distortion of the
display image.

Degauss removes magnetic discoloration from the display image.

Recall returns most options to the original factory default settings
if the monitor is currently using a preset video mode. (See the “Video
modes” section in this guide for information about the factory preset
modes.)

Advanced Option opens the Advanced Option menu. Color opens the Color
Manager menu.

Language changes the display language for the OSD control system.

User displays information about the monitor’s preset modes.

OSD Manager moves the OSD control window on the screen.

Exit closes OSD control system.

you cannot enter into menu on most universal remote only on off switch,channel change and volume up and down thats the most you can get out of a universal remote.you will need the originald remote.

Here is something that may help from the toshiba.com website under your model number television. Q. Why are people on my screen green?
Models: 32HL17, 37HL17, 42HL17, 42HL167, 47HL167, 52HL167, 42HL167, 42LX177, 46LX177, 52LX177, 57LX177
REF:FAQLCD00107
If the problem is not the connections, try adjusting the tint on your television. A high tint setting will usually create a green
image on the screen where as a low tint will create a more red hue. In order to access your television's tint:
1. Press the “MENU” button on your remote control and use the LEFT or RIGHT arrow keys and select the
VIDEO menu.
2. Then use the UP and DOWN arrow keys to highlight PICTURE SETTINGS and press the "ENTER" button on
your remote.
3. Next use the UP and DOWN arrow keys to highlight TINT then use the LEFT or RIGHT arrow keys to adjust the
TINT. If the picture is too green the tint will need to be lowered.
4. Once you have adjusted the tint to your liking, use the DOWN arrow key to highlight DONE and press ENTER. The toshiba customer service telephone number is : 1-800-631-3811. I hope this helps you with your problem.

switch off radio. not by the key but by the button. Hold down function until a menu comes on and then scroll through the menu using function button...
You cannot program this while it is on it needs to be in standby mode.