SOURCE: IBM Selectric III - ribbon won't turn
Make sure the ribbon cartridge lever is closed and that the ribbon is on the outside of the shock wire (where the ribbon exits the left side of the cartridge)
SOURCE: IBM SELECTRIC III, won't print
try turning the metal shaft that the carrier is on. turn it towards the back of the machine.
SOURCE: I need to know how to install a ribbon on an IBM
Go to lexmark.com and click your way to publications there you can get instructions and pictures of installation. Remember there are 2 different ribbons for Selectric III,s.
DickyO
SOURCE: Ribbon Installation
A picture is worth a thousand words, go to lexmark.com and click your way to publications you will find a picture and description there.
DickyO
SOURCE: The ribbon won't advance on my IBM Selectric III
When the lever closes does the driver move to the right and aganist the ribbon, they get gummed up and stay opened. If this is a generig ribbon the top of the ribbon cassette will sometimes get in the way. If the ribbon isn't lifting you may be in stencil .
DickyO
92 views
Usually answered in minutes!
×