Question about Konica Minolta Office Equipment & Supplies
It is checked that the movement of the blade motor (M14) is not completed, and the 24V power source is also checked. The drum READY1 signal (READY condition) cannot be detected within a specified period of time after the drum motor (M2) turns ON. Or, the drum READY1 signal (READY release condition) cannot be detected within a specified period of time after M2 turns OFF. At this time, an error detection signal (24V cut out) is detected.
Drum motor (M2) Blade motor (M14) Printer control board (PRCB) Blade sensor /1 (PS30) Blade sensor /2 (PS31) DC power supply /2 (DCPS2) Wiring harness broken Loose connection
Failure of PCL connection is detected.
Posted on Mar 25, 2020
That is correct. The IP511A is for the 7255 / 7272, and the IP511 is for the 7155 / 7165.
This is probably due to these machines using different image processing boards.
I am actually surprised it lets you get as far as you did with it.
Posted on Feb 08, 2008
Tips for a great answer:
Dec 25, 2016 | Konica Minolta 7255 Lower Fuser Picker...
Mar 13, 2014 | Konica Minolta 7255 Lower Fuser Picker...
Mar 03, 2014 | Konica Minolta Bizhub c203 Copier
Jan 26, 2014 | Konica Minolta Office Equipment & Supplies
Feb 08, 2013 | Konica Minolta TN601K Toner for 7155,...
Nov 28, 2012 | Konica Minolta TN601K Toner for 7155,...
Feb 08, 2008 | Office Equipment & Supplies
54 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 1 Expert