My Office Printer Lexmark X342n is not accepting any command

My name is pramod Mahajan My printer problem epson office 620 printer start now properly but send the print so printer display Printer error see yaour documention. so plese give me solution

how to clear the fax memory on x342n

Please try to do the following steps

1 From the control panel, press Fax.
2 Press Menu.
3 Press up or down button repeatedly until REPORTS is selected.
4 Press the check button
5 Press up or down repeatedly until Fax Call log or Fax Job log is selected.
6 Press the check button to submit

For further assistance, please contact Lexmark Technical Support.

Go to HP website and download new drivers for your printer.

Tips and tricks For the LEXMARK X342N


1) Faxes won't print.

Try this first....
Press <MENU> then <*> <#> on the keypad
Press <UP ARROW> and see "UTILITIES RESET SYSTEM"
Press <CHECK MARK> and see RESET SYSTEM
Press <DOWN ARROW> and see (FAX NVRAM)
Press <CHECK MARK> should reset the fax memory.

Try this second....
Press <MENU> then <*> <#> on the keypad and see "SERIAL NUMBER"
Press <UP ARROW> and see "UTILITIES RESET SYSTEM"
Press <CHECK MARK> and see RESET SYSTEM
Press <DOWN ARROW> <DOWN ARROW> <DOWN ARROW> and see (ERASE FFS)
Press <CHECK MARK> should reformat the fax memory.
It will reboot. Occasionally says the FAX NVRAM is bad
when performing the boot-up self-test and corrects the problem.

2) PC LIFE WARNING message
After replacing your photo conductor kit you need to reset the "PC LIFE WARNING" message. With the front toner door open press and hold the red <STOP> until you see the "RESETTING PC COUNTER" message

have you installed the driver properly then good .in printer a fax printer is also installed when you install the full software of printer driver .for sending fax from any document choose the print option and in printer select the fax printer and send the fax.
but make sure fax printer is installed.

I SORRY I CANNOT HELP YOU AT THIS TIME

OTHER OPTION

ONLINE AND TYPE

LEXMART X342 ALL IN ONE PRINTER INTERMITING PRINTING ERRORS

LEXMART X342 ALL IN ONE PRINTING PROBLEMS

LEXMART ALL IN ONE FAXING PROBLEMS

GO INTO CONTROL PANAL, OPEN FOLDER, GOTO
PRINTING PREFERENCE, SERVER PROPERTIES,
PROPERTIESS AND LOOK AROUND AND SEE IF YOU CAN FIGURE IT OUT

ROD

CONTROL PANAL, OPEN FOLDER, HIGHLIGHT PRINTER OF FAX MACHINE GO TO SERVER PROPERTIES OR PROPERTIES AND CHECK THE PORTS, DO SOME ALIEGNMENTS, UPDATE SONE DRIVERS, SEE ANY ERRORS

GOTO DEVICE MANAGE LOOKING FOR ANY TYPE OF MARK GREEN ARE GOOD AND RED AND YELLOW OR ORANGE IS BAD

CLICK ON THEM AND FOLLOW INSTRUCTIONS

ROD

Contact Lexmark and get updated firmware - had this problem on an X342n unit yesterday and applying an update (now shows firmware LC.MD.P114 ), faxes started receiving properly.

A 902 Service Engine Software error indicates a failure in the engine board software, power off clear print que on pc print driver then power up if problem persisits see this link

http://www.marketpoint.com/article.cfm?id=119