Maytag Atlantis MAV6451 Top Load Washer Logo

Related Topics:

A
Anonymous Posted on Nov 17, 2013

Maytag Atlantis MAV8600AWW top load washer

Putting holes and rips in clothes and towels. Screeching noise when spin cycle is ending.

5 Related Answers

Anonymous

  • 625 Answers
  • Posted on Sep 05, 2007

SOURCE: Maytag Atlantis 7600 spin cycle (top load)

the maytag runs in one direction for wash. it reverses to drain and spin - check for a broken or loose belt. maytags I have run into circa 1989 have two belts. as for the softener dispense, there may be a solenoid valve that is supposed to open. may be just a flapper type of valve. softener goes in by gravity feed.

Ad

Anonymous

  • 5911 Answers
  • Posted on Feb 28, 2009

SOURCE: screeching noise in maytag topload washer

The following link explains the problem you are having with your Maytag:

http://www.fixya.com/support/r387833-maytag_washer_squeaking_problem

It is common for the brakes on Maytag top loaders to wear and make noise, as well, as the snubber. There is a helpful tip that you can try to quieten the noise if it is the snubber. DO NOT oil it, or lubricate with any petroleum based products! This will ruin the unit and actually make the problem worse. NOTE: If the snubber is excessively worn, it was also cause vibration on the spin cycle.

If the brakes are worn, however, you can put a light film of oil on the brake pad. It is common for the pad to collect moisture in humid and damp climates and start to squeak against the brake stator. The brake pad consists of a rotor with a leather edge (pad). The leather can absorb moisture and begin to squeak against the brake stator. Oiling it slightly will get rid of the noise.

Confused? If you have questions, please let me know. I hope you find this information useful.

NOTE: There is a follow-up comment at the bottom of the link I provided from another user. The method this person used to release the tension on the brake can save you from having to purchase the brake release tool.

Anonymous

  • 220 Answers
  • Posted on Sep 03, 2009

SOURCE: Maytag Atlantis stopped mid cycle

Bad/worn/broken lid switch look at the back of the lid there is a little lid cam there that hits a switch,if this switch isn't engaging it will do just what you are describing.use a small screw driver to push the button in and see if it starts.

Anonymous

  • 17 Answers
  • Posted on Oct 24, 2009

SOURCE: make loud noise during spin cycle

Washer may be out of balance, Move closes around in washer and restart

Anonymous

  • 1 Answer
  • Posted on Feb 06, 2010

SOURCE: I have a maytag Atlantis washer - 7 years old, it

I have a Maytag Atlantis top load washer which leaks in the rear right hand corner under the discharge hose, how do I take the machine apart to get to the problem.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

At times, my washer won't spin all of the water out of the clothes/towels

Sounds like a problem with the spin cycle. So I suggest re-spin cycling your cloths and contact a technician or if you still have a warranty, take it back and say its malfunctioning.
0helpful
1answer

My MAV8600AWW top load washer makes a loud steady squeal whining noise in spin cycle. Load size doesn't affect noise. Machine is 7 years old. Any guess as to problem?

Maytag had problems with the berrings on the transmission . water gets in and the berring goes bad rorring as it spins. Dump it and get a Whirlpool.
1helpful
1answer

Make loud noise during spin cycle

Washer may be out of balance, Move closes around in washer and restart
0helpful
1answer

Damp clothes at end of spin cycle

Time to check out and clean your filter...........
0helpful
1answer

Maytag atlantis mav6000

sounds like the carbon brushes need replacing in the motor, they can cause a screeching sound as they wear down.
0helpful
1answer

Maytag Atlantis 6451 Stops abruptly at end of rinse cycle

sounds like the brakes squeal to me is that the end of the cycle if it is i would worry about it brakes do that not worth the effort of dealing with
0helpful
2answers

Maytag Atlantis Mav8600aww

If your timer has a gray rubber ring on it, the timer is in 4 pieces. Pull the top middle part out. Then there's a white locking piece in the center. Once that's out the other 2 pieces will pull out. Note: The photo shows the top cover removed. The locking pin is the white center. RanchMom
Not finding what you are looking for?

88 views

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...