Whirlpool RBD305PD Electric Double Oven Logo

Related Topics:

J
James Broyles Posted on Nov 16, 2013

Whirlpool model number RBD245PDQ15 CONTROL PANEL DISPLAY IS BLANK

4 Related Answers

Anonymous

  • 2 Answers
  • Posted on Dec 19, 2009

SOURCE: how to remove the control panel on Whirlpool double oven Model RBD305PDS14

Emge & Associates is investigating gas and electric ovens manufactured by Whirlpool, including such popular brands as Whirlpool, Jenn-Air, KitchenAid and Maytag.
The firm is investigating reports that the electronic control panel on certain models is subject to failure after a limited number of uses of the appliance’s “self-cleaning” setting. While most foods are cooked at temperatures reaching 375 degrees, the “self-cleaning” setting raises the interior oven temperature to 1,400 degrees. Due to defects in the design and or manufacturing, the electronics contained on many ranges are damaged by extremely high heat. Repairs to damaged control panels typically cost in excess of $300 per replacement.
If you have experienced failure of the control panel in your range after using the “self-cleaning” setting, you can join this investigation by contacting Emge & Associates at (800) 629-3409 or (619) 618-2974.

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 01, 2010

SOURCE: Whirlpool electric double oven #RBD305PDQ14 control panel blank

The control panel part on my Whirlpool double oven (part #8302319) went blank six months back. Replaced it. Asked if there was a warranty on the part, was told no there was not. Yesterday, the six month old control panel went blank. Disappointed that Whirlpool manufactures such garbage.

Anonymous

  • 2341 Answers
  • Posted on Jul 28, 2011

SOURCE: double oven no model number

Hello,

Your oven has resetable high limit thermostat that tripped off on the self clean cycle,im not sure if you have free standing,or a wall oven if freestanding the t-stat is on back panel if wall oven its behind control panel on upper oven and for lower oven its behind the grill between bottom of upper oven and top of lower oven. In either case it has a small red button that can be pushed in to reset it

Hope this helps and if it does please give me 4 thumbs up

Gene

machinetech7

Jason Kennidy

  • 1344 Answers
  • Posted on Apr 25, 2012

SOURCE: Whirlpool oven model RBD245PDQ15

Replace the display/control pt # W10340941, it can be purchased at www.repairclinic.com or www.apdepot.com

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Whirlpool double oven display reads E6 F2

I have a Whirlpool RBD275PRT00 that showed the same codes. it would allow me to cancel and work for a few more days until the display finally went blank and after a few days of being blank displayed the codes again. I ordered a New Electronic control board from Sears W10340941 for 189 dollars just recently, when I just looked for this part for your model it's that same number but now listed for 254. There are services that will repair your board for a little less but it will not be a new board. it's still much cheaper that a new oven.
1helpful
1answer

Whirlpool oven model RBD245PDQ15

Replace the display/control pt # W10340941, it can be purchased at www.repairclinic.com or www.apdepot.com

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

0helpful
1answer

Double oven no model number Whirlpool 14 years old Door is locked after self clean and display is blank

Hello,

Your oven has resetable high limit thermostat that tripped off on the self clean cycle,im not sure if you have free standing,or a wall oven if freestanding the t-stat is on back panel if wall oven its behind control panel on upper oven and for lower oven its behind the grill between bottom of upper oven and top of lower oven. In either case it has a small red button that can be pushed in to reset it

Hope this helps and if it does please give me 4 thumbs up

Gene
0helpful
1answer

Model RBD245PDT12 has message error E6 and F2

This is a common failure of the control board. It is often accompanied by a intermittently blank display. The board is no-longer-available but we can rebuild it for you at www.fixyourboard.com.

Control board part number: 8302967
0helpful
1answer

OVen display is blank and oven won't turn on. Oven has power (checked breaker, oven light works)

Can you supply a model number?
Most likley you have a bad erc control board ( clock). But a model number would help narrow it down.
0helpful
1answer

Our home has a Whirlpool Gold built-in convection oven. The home is @5 years old. We've lived here for one year. Today, the display had an error message (E6). After we cleared the error message, the...

Hello!
This blank display is a common control board problem. If the buttons beep when pressed, then the control board is getting adequate power. If the buttons beep.. and your oven light still turns on when the oven door is open.. this a text book control board failure. We at Fixyourboard.com can solve this problem for you, and back the remanufacture with a two year warranty.
GBD RBD Whirlpool Oven Problems Causes and Solutions
0helpful
1answer

Whirlpool Accubake System Mod.# RBD275PB10 front panel blank

GBD RBD Whirlpool Oven Problems Causes and Solutions

Hello Edward!
This blank display is a common control board problem. If the buttons beep when pressed, then the control board is getting adequate power. If the buttons beep.. and your oven light still turns on when the oven door is open.. this a text book control board failure. We at Fixyourboard.com can solve this problem for you, and back the remanufacture with a two year warranty.
0helpful
1answer

Whirlpool electric double oven #RBD305PDQ14 control panel blank

I suspect a poor connection at the wiring to the EOC is the cause of the failures.
6helpful
2answers

Whirlpool RBD305PD has error F2E6 error on control panel

When this code appears and display is going blank too, it is always the control board. The only option is to buy a new one or get it repaired. It can be fixed quickly and reliably. www.fixyourboard.com
Not finding what you are looking for?

79 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...