Re EQ function without remote controller

Not sure where delivering 575 Strawberries came from, but I fixed your question a bit, even though I understand none of it!

Program a Remote Control ' Sony Canada

https://www.sony.ca > televisions-projectors > articles

Sep. 2, 2020 - For a complete list of remote control codes and programming ... You'll need the remote control model number to find the appropriate codes ... Can the Remote Control be Programmed to Operate a DVD/VCR or DVD/Receiver ... Missing: strawberry ‎' Must include: strawberry

Sony Remote Codes and Programming Instructions

https://www.directutor.com > content > sony-universal-r...

Programming Instructions, Follow these steps to program the remote control. 1. ... Universal remote control codes for SONY TV ... DBS Receiver Code Numbers: Missing: strawberry ‎' Must include: strawberry

So assuming remote is functional then receiver has failed, or not powered, or fuel solenoid malfunction. Check there is power to the fireplace as the pilot flame is self powered via the thermocouple. If fireplace has power, then either receiver or solenoid has failed... again assuming remote is working. Doesn't if have a start or test button on the fireplace? Not likely the remote is the only on.

What's the make and model?

Comment below so I may assist further if needed.

Hi Ben please check the assignment of that port. The port could be bad. I checked several sites for a replacement remote and they are not available. Thank you Onkyo USA

HI, this receiver does not have an option to Bi-amp speakers. Thank you, Onkyo USA

There are no other fuses in this receiver. Any other diagnosis
would require electronics repair knowledge as this unit is microprocessor controlled.

In KD-DV5300, replace capacitor C751. Capacitors dry with age.

Here's a great explanation of the mx feature from a review of the alpine decks... "Media Xpander (MX) is a great feature. If you listen to lots of MP3s, you know the quality on some can leave a bit to be desired. Media Xpander helps compensate by adding bass and tone to your files. And you can control the level of ‘help’ you want (from 1-3, mine sits at 2 except for the worst discs). Even my worst bootlegs come out sounding pretty decent – and you can use it on both CDs and FM radio." hope that helps you put it to good use!

Hello,
There could be a few reasons as to why your remote control no longer functions properly. The following is a common list of problems that could help you determine what the problem may be.

1. The batteries need to be replaced. The battery contacts could also be dirty.

2. The remote control signal transmitter could have been damaged by dropping it or simply have gone out.

3. The receiving sensor could have malfunctioned on the device you are try to use the remote on.

4. If you have a universal remote control, it could have lost the code that operates the device from it's memory.

5. The button on the remote control could have been damaged and is not making a proper connection for the function you are trying to use.

It is hard to pin point an exact problem without further information like the remote control brand, model/serial number, and a more detailed description of exactly how it worked before or how the device was working before, when it went out, was it dropped, etc.

I would suggest changing the batteries or cleaning the contacts first to see if that solves the problem. I wish you the best of luck in fixing the problem.

If you would please, rate my help. I would greatly appreciate it. Thank You

does anyone knows the code to control the onkyo TXDS 787 through the comcast.remote.?

My situation is different. The remote control can turn on the unit and all functions are working, except that I cannot turn it off using the remote control. Anyone know why and how to fix it?