Error codes Er rF

Full make and model in all questions please.

Causes of the Er rF Error Code An Er rF error code, as we've mentioned, indicates that there's some kind of problem with the fridge's fan motor; specifically, that the fan motor isn't running when it should be.
Dec 16, 2021

How To Fix Er rF Error Code On LG Refrigerator

it means there is communication issue. most common problem is main control board on back of refrigerator..
hope this helps.

The RF error message is telling you that there's a defective fan anomaly Appliance 911 Sea Breeze

Hello Anonymous!
Error code Er rF is an :Abnormality of BLDC FAN Motor for Freezer.

• The freezer fan motor may be Defective.
• Unplug the fridge for about 30 minutes and plug it back in, if the code appear again within 24 Hr , the Main Board might be defective too.

• Check if the freezer fan is blowing normally, then the Main board has a problem.
• If not, the Fan Motor is defective or both.
• I would change the Fan first then the Main PCB
  

Good Luck,
JP

Do you have ice? If not it means you need a ice maker fan replacement. I had to have one last week. This is a known problem

Good Morning Steve - I am happy to assist you, however according to my database I'm not showing that Frigidaire has an error code FR for a dishwasher or for any product for that matter. Could the error code possibly be an ER, PF, FL or RF?

· Typically error code ER indicates that the main control board has detected a stuck key or a key pressed for more than one minute.

· Generally error code PF means that the dishwasher has experienced a power failure and you should be able to resume the cycle.

· Error code FL is advising you that the water valve is in the open position.

· RF indicates that the rinse aid reed switch in dispenser is open and needs to refill the rinse aid.

Let's try resetting the unit by either unplugging it or flipping the household circuit breaker to the off position. It is important to wait approximately ten minutes and then turn on the dishwasher. If issue persists, then I would personally contact a professional to accurately diagnose the washer to determine the root cause to reduce the risk of unnecessary parts.

I hope these troubleshooting tips help you in some small way.

CD Changer Error Codes: If problems arise during CD changer operation, the following error codes may appear in the display:
ER-1: No magazine loaded.
ER-2: Problem in the disc loading function.
ER-3: Error in the disc loading function.
ER-4: Error in the disc unloading function.
ER-5: Error in the magazine position.
ER-6: Error in the laser pickup position.
ER-7: Error in the laser focus on the disc.