Panafax uf s1 clear memory - Brother IntelliFAX 2800 Laser Fax

Press

Function
7
monitor key slowly 4 times
* star key
6

scroll down to ALL JOB CLEAR
set

wait for the machine to reboot.

Press
Function
7
monitor key slowly 4 times
*
6
scroll down to SHIPMENT SET
set
2

wait for the machine to initialize.... 3 mins.

Your killing a fly with a sledge hammer. If you do a ALL JOB clear from test mode 6 instead of SHIPMENT SET... you wont loose all your one-touches or fax parameter settings.

UG-5520
You probably have bad jobs stuck in memory if you are not dead out of toner.

To clear the memory

press
function
7
monitor key slowly 4 times
*
6
scroll down to ALL JOB CLEAR
set

your fax will now reboot after 2 mins.

What happens when you try to send?

Bad fax stuck in memory. Press:

Fuction
7
monitor key slowly 4 times
*
6
scroll down to ALL JOB CLEAR
set

See if there is a "slider" on either side of the machine.

go into service mode then into ram initialize and do all job clear. yo avoid this happening again set "inc. file save to invalid"

i just dont know if ufs1 is the same with ufs10

if so

press
this

function #*##
scroll
right arrow till you found ram initialize
press
start

found a full manual here
https://support.panasonic.co.nz/docstore/UFS1%20book.PDF