- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I you use a universal remote you might be able to use some of your programming features, you can get such a remote from Best Buy, Radio Shack, Target, or Wal-Mart. Now for the down side with the universal remote you will only get some of your programming functions as I said earlier. If you want all of those features you are going to have to contact the manufacture and order a remote for your television. There are places on line such as ebay, or amazon where you can buy a remote for this set, and this might be considered as an option also. In any event whether
you buy a universal remote or buy an OEM remote, you will need a remote to "properly" setup your TV. You can use the front panel controls for limited setup however doing that is tedious.
Here is a link for the generic programing instructions for the RCA universal remotes. Scroll down the page for a list of device codes. Let me know if this is what you were looking for. http://www.thompsontv.com/rcarc.html
Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are programming into the remote. While some trial and error may be required to get the right codes input to control your equipment, the pleasure at getting rid of several extra remote controls will far outweigh the hassle in getting it programmed.
1Step OneManually turn on the device you wish to program.
2Step TwoPress the Code Search button on the remote until the indicator light turns on.
3Step ThreeRelease the Code Search button.
4Step FourPress and release the button for the device you are programming.
5Step FiveEnter the three-digit code for the device using the number buttons on the remote. After the code is entered, the indicator light turns off.
6Step SixAim the remote at the device and press the power button. The device should turn off.
7Step SevenPress Channel Up on the remote with the device on. If the device responds, no further programming is required.
8Step EightTo look up a device code to enter directly into the remote, you can visit the GE Remote Code Locator
002 012 102 103 112 212 502 512 818 914