Question about Maxtor Personal Storage 3200 (U01E200) 200 GB Hard Drive

1 Answer

Maxtor Personal Storage 3200 200 GB... Problem

I recently purchased a new external hard drive and connected it up to my home network. It is connected to my desk top via USB connection. It works fine on the desk top, I have three laptops that share my home network and they can all see the Icon for the external hard drive. However when they click to connect a window pops up saying, "you might not have permission to use this network resource see your administrator" and below that it says "Not enough server storage is available to process this command". This happens on all three laptops.I have tried all of Microsoft suggestions changing the reg edits etc. but no luck. All running Win XP home Edt.

Posted by oldbiscaya on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 382 Answers

Its going to be a hardware thing. Is the drive connected to a UB2 port? The network itself has its own data transfer rate  ( ie. gigabit ) you need to make sure you cables are no longer than 6 ft, its plugged into a high speed port, and that all ports on the chain are of the same speed. If you have the option, go firewire for this. If that does not rectify it, check adminsitrator properties of the drive.

Posted on Oct 28, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My Lap top HDD is not showing up when connected to my Desk top. my siemens lap top hinges broke. I tried working with it and damaged screen. Removed HDD drive and found a free case at home with the USB...

First make sure usb cable connected to harddrive is working fine. try it in different usb ports. Press windows key +R key so you can see run then type in run "devmgmt.msc" then press ok so you can see device manager uninstall all usb drivers then it automatic install usb drivers. then check. Also you need to change registry for that type in run "regedit" then press ok then you can see registry editor then locate below key. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11 CE-BFC1-08002BE10318} And remove upper filter and lower filter.Then restart computer then check. Also locate the below key and make sure it's value is 3 not 4. HKLM\system\currentcontrolset\services\usbstor make sure start value is 3 not 4. Let me know if you need further assistance. Thanks for using FixYa
0helpful
1answer

I have the Lacie Minidisk Ethernet 500 GB that contains all my house PC backup. I both an USB Minidisk Lacie (1 GB) in order to use MySafe feature but it never worked.

Hello Elio,

Use MySafe to back up the files stored on the Ethernet Disk mini Home to an attached USB storage device. This way, if files on the Ethernet Disk mini are damaged or accidentally deleted, you can restore them to their original locations.
There are three main steps to using MySafe,Connecting an external USB hard drive,Backing up files to the external USB hard drive,Restoring files to the Ethernet Disk mini (if necessary)
Before you can back up files, you need to connect a hard drive to your Ethernet Disk mini via the USB port on the back. Use a hard drive that is USB 2.0 compatible.
While connecting an external hard drive make sure your Ethernet Disk mini is turned on and connected to your network.Turn on the external USB hard drive.Connect the external hard drive's USB cable to the USB port on the back of the Ethernet Disk mini, just like you would connect the external hard drive to your computer.Confirm that the drive is properly connected. Log in and click on the Administer HipServ link. Click on USB External Storage under System.
To back up files, navigate to the file or folder you want to back up to the external hard drive and click on the disk icon in the "Backup" column of the file list.When you back up files to MySafe, the Ethernet Disk mini duplicates the file path in MySafe so that everything you back up is organized in MySafe just as in its original location. So, if you copy a file from MyLibrary, a MyLibrary folder will appear in MySafe, with all folders leading to the backed up file.

Always click the Safely Remove Drive button on the USB External Storage before unplugging your MySafe external hard drive. Wait for the interface to change and for the Use Drive button to appear before disconnecting the USB cable from the Ethernet Disk mini. Failure to safely remove your external hard drive before disconnecting the USB cable can cause data loss and/or damage the drive. Always use the Safely Remove Drive feature when disconnecting an external hard drive.
2helpful
1answer

Hitachi 250GB external drive not being recognized by desk top or laptop? Any suggestions?

An external storage-device has four major components:

* the USB cable

* the power-adapter

* the disk-drive inside the enclosure

* the USB-to-disk-drive adapter inside the enclosure.

One of these components has failed.

Try a different USB cable.

Try connecting to a different USB port on your computer.

Try connecting to a USB port on a different computer.

Take a "multi-meter" and measure both the voltage and amperage output from the AC adapter, and compare with the specifications on the label on the adapter.

Open the enclosure, and remove the disk-drive, and then connect it as a "slave" disk-drive in a desktop computer, to see if it works at all.

Purchase a new, compatible, disk-drive, and install it in the enclosure, to "revive" your external storage device.

Get the part-number and serial-number from the label on your disk-drive, and access the manufacturer's web-site, and use "check warranty status", to see if they will replace the device, at minimal cost to you.

There exist commercial "data recovery" services that can try to repair your device, just long-enough to rescue and copy your files. For example, see: https://services.seagate.com/index.aspx?lng=en-US for a "no data - no charge" guarantee.


0helpful
1answer

When I plunged in FANTOM firewire and USB external HD (I only use the USB) at windows start it said it wanted to (blue screen) check drive for errors. I agreed and it stopped half way at 41% and did not go...

It is entirely possible that your external hard drive is failing. I would recommend downloading Seatools for Windows (link below) and run extended hard drive test on it. Chances are if it is failing, it still recognizes within the system, but it is not readable enough for windows to display it and allow you to browse.
http://www.seagate.com/www/en-us/support/downloads/seatools
0helpful
1answer

The lacie grand 1 tb usb hard drive will turn on but it's logo is not appearing on my desk top and I can't access any of my files from it. Any ideas?

An external storage-device has four major components:

* the USB cable

* the power-adapter

* the disk-drive inside the enclosure

* the USB-to-disk-drive adapter inside the enclosure.

One of these components has failed.

Try a different USB cable.

Try connecting to a different USB port on your computer.

Try connecting to a USB port on a different computer.

Take a "multi-meter" and measure both the voltage and amperage output from the AC adapter, and compare with the specifications on the label on the adapter.

Open the enclosure, and remove the disk-drive, and then connect it as a "slave" disk-drive in a desktop computer, to see if it works at all.

Purchase a new, compatible, disk-drive, and install it in the enclosure, to "revive" your external storage device.

Get the part-number and serial-number from the label on your disk-drive, and access the manufacturer's web-site, and use "check warranty status", to see if they will replace the device, at minimal cost to you.
0helpful
1answer

Desk top freezes when external hard drive connected via usb

Hello,

The issue might be with the USB root in the device manager, hope you are using windows XP, try rescanning the the uusb ho9stcontroller in in the device manager.

Please let me know if you have further issues.



1helpful
1answer

Verbatim 250GB External Hard Disk not recognized by PC

Almost always, when a USB drive doesn't assign a drive letter in MY Computer the issue is a Mapped network drive using the drive letter the USB drive is attempting to use.

With the drive connected, open DISK MANAGEMENT find the USB Drive, right click it and assign it an available drive letter.
0helpful
1answer

D-link router DI524 using next G external wireless modem

You can purchase a usb wireless dongle and attach to the PC. From then onwards you can set up a wireless network without connecting the usb cable for the router. The dongle will enable wireless capabilities on the pc. The only thing left is to have all devices running in the same workgroup.
0helpful
1answer

Adding an external hard drive to a home wireless network

Try setting configuring the privledges setting. Make sure there the network setting is correct, and make sure all user accounts have admin access to network
Not finding what you are looking for?
Maxtor Personal Storage 3200 (U01E200) 200 GB Hard Drive Logo

Related Topics:

109 views

Ask a Question

Usually answered in minutes!

Top Maxtor Computers & Internet Experts

Brad Brown

Level 3 Expert

18689 Answers

Jax Planet
Jax Planet

Level 2 Expert

923 Answers

Tony Raia

Level 2 Expert

264 Answers

Are you a Maxtor Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...