Using magick jack it will make calls but wont recieve

DO NOT POST YOUR PHONE NUMBER ONTHIS SITE.

Go to makers website next time.
http://www.magicjack.com/customercare.html

Yes, you can. Go to a local electronics store or go online and buy a cable (we used to call them patch cords back in the day) with a 1/8" STEREO plug, (also called a mini phone plug) on one end and two phono plugs (also called RCA plugs) on the other end. They're available in various lengths -- 12" is a good choice. We're talking less than $10 here.

Connect the RCA plugs into an appropriate pair of unused INPUT jacks on the back of your receiver -- CD, VCR1, Tape Monitor/VCR2 will do. DO NOT use the phono jacks. The red plug is for the right channel. You can leave the cable plugged in. Then whenever you want to listen to your iPod, insert the mini phone plug into the iPod's earphone jack, switch the receiver to the input for the cable, and start playing. You may have to increase the volume on your iPod to avoid having to turn the receiver all the way up (or down) to listen, but after that you can use the receiver's volume control.

Ever stop to think the Magic Jack doesn't work like the said it does? Use Google+ for that.

Just download and install this Download CORE_RL_magick_.dll

No. The Mitel Superset 4015 is a proprietary digital phone that will only work on Mitel telephone systems. It will not work on some of the older analog Mitel systems.

Is there a dial tone if you pick up the reciever ? Can you send faxes or use the machine to make a phone call ? If you can make calls or send faxes the machine probably needs to be set to the auto recieve mode so that it automatically answers when a fax is being recieved. If no dial tone you may have a loose connection to your phone jack.

It is very unlikely that you will be able to send faxes through VOIP. All faxes have an analog fax card, and magick jack is a digital service, if you purchase a digital to analog filter that may work but is not supported by your fax machine. you can also attempt to change the fax speed to medium and error correction mode to off.

Al
[email protected]