Question about Sony Ericsson K750i Cellular Phone
My camera stopped working two days ago. whenever i open the lens to get picture it will just blink and will bring me back to the wallpaper. i tried opening the application but it will just blink. i have already performed a master reset and everything was deleted, tried the camera again without synching the device and still i have the same problem, would this be an indication that its a hardware problem? any otehr solution?
May be cheak for loosen or dammege camera cableand camera also if ok reload the softwere.
Posted on Oct 16, 2007
My cam is not open please help this problam
Posted on Nov 06, 2008
Posted on Oct 17, 2007 Tips for a great answer:
Nov 11, 2013 |
Samsung Digimax EX1/TL500 Digital Camera
May 15, 2011 |
Feb 19, 2010 |
Kodak EasyShare DX4530 Digital Camera
Nov 21, 2009 |
Canon EOS Rebel GII with 35-80 lens 35mm...
Dec 16, 2007 |
Olympus Stylus 770 SW Digital Camera
Sep 12, 2005 |
Samsung Digimax V4 Digital Camera
people viewed this question
Usually answered in minutes! Step 2: Please assign your manual to a product:
reinstall all your system softwares from care centre
Add Your Answer
Wont turn off-on
I'm not sure the lens was out, when it was connected to the computer. Let us assume it was. Normally, the battery should be charged when the camera is connected to a USB connector on the PC. But not all USB connectors are perfect wired. And if you use a USB hub you can be sure the battery was not loaded. So as soon as the camera came from the PC it needed full power and could not get it.
Now you removed the battery, but before placing it back in the camera, please charge it on an external charger. When you place the charged battery, and the yellow light starts flashing again and won't stop quick, you could try to reconnect the camera to the computer and see what that brings. I would have switched off the camera, before I disconnected it from my PC.
Than the sand issue. If just a grain of sand is in the lens bellow, it could serious obstruct the lens from going back. If you can see the grain of sand, you could try to get it out. Very thin needle (or two?)
But if you can't see something, don't move the lens at all.
You could damage the gears in the focus and zoom mechanism.
I wish you luck with the camera.
I was using my cam a few days ago and yesterday, my cam all of a sudden stopped working. How can i figure out what's wrong and how can i fix the problem?
A problem with the lens is one of the most common reasons for a failure...
Checkout this tip about digital camera error messages
Lens Errorfix for Digital Camera
Stops taking pictures
The battery are fully charged AA 2400mah / 2650mah Duracell at 4.0 ma with load test. I was wondering if there is any circuitry problem.? Any experts in digital camera electronics please respond? Trick: To bring back the lens back in for safekeeping i trik this, i turn it on while it is reading the memory etc and after a sec or two i turn the knob to off, this way lens goes back inside.
I have read other brands also have their cameras lens sticking out and never going back inside.
Blinking circle when i try to take a picture
If not, try moving the switch back and forth several times to clean any corrosion.
Try another lens on it to determine if its the camera or the lens.
Samsung Digimax V4 Power Consumption
Not finding what you are looking for?
Ask a Question
Manuals & User Guides
Please try again.
Posted on Oct 17, 2007
Tips for a great answer:
Nov 11, 2013 | Samsung Digimax EX1/TL500 Digital Camera
May 15, 2011 | Cameras
Feb 19, 2010 | Kodak EasyShare DX4530 Digital Camera
Nov 21, 2009 | Canon EOS Rebel GII with 35-80 lens 35mm...
Dec 16, 2007 | Olympus Stylus 770 SW Digital Camera
Sep 12, 2005 | Samsung Digimax V4 Digital Camera
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: