Question about Haier HDP18PA Stainless Steel Free-Standing Dishwasher

Open Question

WASHING DETERGENT NOT RELEASED KUDS30IVWH3 - Haier HDP18PA Stainless Steel Free-Standing Dishwasher

Posted by CHARLIE FLORA on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Build up of dirt in tub making clothes dirty... How do I clean inside of machine?


If you use powder detergent ( clay carrier) the build up is from undissolved powder ( clay)
It forms cakes between the spin tub and the outer bowl
The fix is to pull the washer apart and physically remove the caked up mud from all parts of the machine
The prevention of future mud is to use liquid detergents rather than powders
It works like this powder detergents have a small percentage of actual detergent in use and that is dried onto a clay base as a transporter agent
In the wash , the detergent is released but the clay will not dissolve
Most is pumped out with each spin but a certain amount remains , dries and starts the dirt process through the clothes
With liquid detergents there is the same amount of actual detergent but the carrier is water and that is diluted in the spin and completely flushed away

Dec 30, 2015 | Washing Machines

1 Answer

ADP 4730


The problem is with either the spring or the solenoid that operates the detergent compartment door. It should be released at the right time by the controller during wash cycle. You have to check the spring and see if it stuck. But if solenoid is faulty then whole detergent dispenser has to be replaced. You could switch to detergent tablet which you drop in the cutlery basket and it works fine. A brand like Finish works well and keeps dishwasher clean.
Alternatively you can purchase a replace detergent dispenser from

http://www.buyspares.co.uk/whirlpool/adp4730-851150429849/dispenser/product.pl?pid=18330&path=463858:496324,47872:463870&refine=dispenser&model_ref=641830

Also watch the video on how to replace.

Apr 23, 2014 | Whirlpool Dishwashers

1 Answer

Laundry detergent & fabric softener go into the washer at the same time immediately when started, the fabric softener should only be released when rinse cycle begins, how do I fix this?


without knowing what your machine is I would suggest that you start your load with only detergent in it the after it has filled and is agitating add the fabric softener-you may have to pause the cycle to do this-hope this helped-cheers Denny

Oct 21, 2013 | Washing Machines

1 Answer

I found some black plastic under the dishwasher and then found some more... it appears to be long as if it was the seal or something across the bottom of the door. Can you tell me what it is and what I...


Hello,
Its hard to tell from the description what it is. Does it like item #4 in first link OR item #31 in second link. If it is item #31 in second link its soundproofing insulation that attaches to kick plate and has come loose,a couple dabs of super glue would reattach it to kickplate
http://www.searspartsdirect.com/partsdirect/part-model/Kitchenaid-Parts/Dishwasher-Parts/Model-KUDS30IVWH3/0593/0130000/W1005148/00003?blt=06&prst=&shdMod= item #4

http://www.searspartsdirect.com/partsdirect/part-model/Kitchenaid-Parts/Dishwasher-Parts/Model-KUDS30IVWH3/0593/0130000/W1005148/00005?blt=06&prst=&shdMod= item #31


If it is item 4 thatsa seal on bottom of door and needs to be there to prevent leaks

Gene

Aug 13, 2011 | KitchenAid KUDS30IVWH Builtin Dishwasher

2 Answers

Fabric conditioner section in draw always full with water after cycle has finished


Detergent drawer is clogged with soap. to remove look for small plastic clip on the inside above the detergent drawer which needs to be released. Remove detergent drawer unit and wash thoroughly under running water, or bucket. Replace and problem should be solved until it gets clogged again.

Jan 15, 2011 | Bosch Classixx WFC 2465 Front Load Washer

2 Answers

Detergent door not opening properly so not washing well


Hi,


There are three common problems that cause the Soap Dispenser or Cup not to open. I have a tip that will explain these problems in detail....

Dishwasher Repair Problem
Detergent Cup does not Open

heatman101


Jan 14, 2011 | Dishwashers

1 Answer

Dark stains occuring in a pattern of dots on garments (pattern


operate one quick cycle with not load with hot water and detergent to clean the drum

Mar 18, 2010 | Frigidaire 14 Cycle Tumble Action Washer

1 Answer

Detergent not released


water probably is not hot enough to release the spring in the door. or your ready for a new spring

Dec 06, 2009 | Washing Machines

1 Answer

Cold wash/rinse selected, but only hot water is used


I have a Sears front load washer and I also noticed that on a cold wash/cold rinse cycle the machine was drawing hot water.

Laundry detergents require water to be at a certain temperature to aid in disolve. The machine adds sufficient hot water, regardless of the cycle, until that temp is reached. If I was to use a cold water detergent the machine, because it has no way of knowing which detergent I'm using, will still add hot water until that minimum temp is released. I don't know if there are machines available which include detergent type as an option?

Sep 28, 2009 | Kenmore Washing Machines

Not finding what you are looking for?
Haier HDP18PA Stainless Steel Free-Standing Dishwasher Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18562 Answers

Peter

Level 2 Expert

202 Answers

Are you a Haier Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...