Emule Show Low ID on Client Computer
You can update the servers it may be become fast. Go this site and add all servers (add to emule) click this link, they automatically update the servers.
OR try this
First of all you need to know the IP of the computer that you use with Emule.
Then go to the router configuration:
- Choose "NAT Settings", and "Virtual Server".
1- If it isn't enabled, enable the "Virtual Server".
2- In "Well-Known Applications" choose de option "User defined".
3- Now the crucial part. Under the Virtual Server List, in the "Local
IP" you place the IP of your computer (on the example, 192.168.1.2,
i.e. my emule computer ip), "Port Range" put 4662 and Protocol TCP.
"Protocol nº." stays blank, and in the "description" you can put Emule
4- Click ADD, to add the rule to the table.
- Again you make the same passes from 3 to add the second rule:
3- In the "Port Range" you place 4672 instead 4662, and on Protocol you
place UDP instead TCP. On "Description" you can place Emule Rule Nº2.
4- Click ADD.
5- After making the 2 rules, click Finish, and on the next screen click on Save&Restart button.
In the next time you start Emule, you can acess to the servers without Low ID.
Don't forget to rate the solution
Mar 23, 2008 |
Computers & Internet