Kenmore 24032\24036 Top Load Washer Logo

Question about Kenmore 24032\24036 Top Load Washer

4 Answers

Kenmore 80 series washer model #11092587210

I bought this washer used and the first time I tried to wash clothes it filled with water then agitated only a few minutes. It will stop on its own and sometimes start agitating again for a few minutes,but most of the time it does nothing. Eventually, it drained the water and went into spin cycle, but this was the next day. Any ideas? I have heard a lot about the lid switch problems and removed mine, but it seems ok. The paddle is intact and nothing major seems wrong with it.

Posted by cmjrugby on

  • 4 more comments 
  • Anonymous Nov 04, 2007

    water won't drain completely after wash cycle.

  • kazar Nov 26, 2007

    The washer will go through the wash cycle but when it should go to the drain/spin cycle to remove the dirty water is clicks and then sits there. I've tried turning the handle to a different drain/spin cycle but that doesn't work either. Any ideas...

  • Anonymous Jan 25, 2008

    I don't know what happen really my washing maching when you load the clothes and on the knob it start working and after it stop not drain.

  • cappy69 Jun 05, 2008

    my washer fills, washes. then does nothing after

  • Mercy M Dec 07, 2008

    I also have a Kenmore 80 series Model # 11028882790...It started making a noise the other day. Now, It doesn't spin.

  • Anonymous Mar 16, 2009

    my washer no longer folds my laundry, i shouldn't have to tell my washer again i already gave her 2 black eye's



4 Answers

James Greene

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 240 Answers

Almost sounds like a timer or timer motor problem.  Could also be a loose wiring harness around the timer.  When you said it when into spin, but the next day, did the timer move at all during the "break".  Usually, a lid switch will give off that "tell-tale" clicking sound when lifting the lid.  See if it makes this noise, but it really doesnt sound like a lid switch issue.  Really sounds like a dead spot, or spots, in the timer.  Let me know.  Jim

Posted on Oct 18, 2007



  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Some1 , (my uncle) thinks that the problem, which we have right now, has something to do with the cellinoid

Posted on Jun 26, 2009



My washer won't work after we moved it into a new house, and I found a fuse in the floor beside it but couldnt find anywhere it would go. Is the fuse from the washer?

Posted on Nov 02, 2008


Thank you.I had the same proublem!

Posted on Oct 30, 2008

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


How many gallons of water does a Kenmore series 80 model 110 extra capacity plus washing machine hold at max and at 1/2 max

The Series 80 washer has a max capacity of 20 gallons. At the lowest water level setting you would have between 14.5 and 15 gallons.

Kenmore 80 series washer. Agitates immediately and does not fill

it sounds like the water valve is bad,the water valve level(sm. med. lg.)controls the water valce-mike

Washer only agitates and fills with water at same time.

The contacts in the timer are shorted (fused together). You can try removing the timer, opening it up and releasing the contacts that are fused together with a small flat blade screwdriver (look for burnt contacts). It might work for a while but it likely won't last. Your best bet is to replace the timer.
Good luck!

Kenmore washer 80 series 110 model not spinning.

unless your washer is over 20 years old, then it wont have a belt. the temperature of the water wont have anything to do with it spinning or not.
need to know if it agitates or drains and just wont spin.
if it agitates but no spin or drain, then you have a bad lid switch.
if it wont agitate or spin, but will drain, then you have a broken drive coupling.

Kenmore 80 Series will not fill up with water

if your washer will agitate when set to fill but not fill, then your pressure switch is bad.
also you may want to check and see if you are getting both hot and cold to your washer.

Kenmore 80 Series Top Load Washer not agitating

Check out this you tube. Had the same problem today. Tipped washer on its side and replaced coupler between motor and gearbox. Parts are about $15
This is a good diagnosis video.

Hot water wont shut off

solenoid valve is jammed open

Kenmore 80 series model no. 110.26842691

Your agitator may be fine but how is your washer behaving is it trying to perform two acctions at one time like spinning and agitating at one time the tarnmission may be locked up
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts


Level 3 Expert

85240 Answers

Cindy Wells

Level 3 Expert

6528 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides