Directly below the drum is the transfer and separation ration unit. which houses two very, very thin gold plated wires the one on the right is the transfer wire which transfers the image off the drum on to the paper as the paper goes over the wire while the drum place the image on the paper. the second wire is separation wire which has an AC signal on it to prevent the paper from sticking to the drum. The second wire might be broken. Have it replaced best to have booth done at the same time since unit comes out? or the spring at rear of the unit are not making good electrical contacts. Ensure power is off. as they do carry High Voltage during the normal operation.
SOURCE: KONICA MINOLTA BIZHUB 750 WITH ERROR CODE C8301
It is a code relating to FM1 fan. The fan is the one on the rear of the machine top right corner behind an ozone filter. If the fan is ok could be a blown icp. *PLEASE NOTE: I WOULD NOT ADVISE YOU REMOVE ANY PANELS OR CARRY OUT ANY ELECTRICAL WORK UNLESS YOU KNOW WHAT YOU ARE DOING AND THE COPIER IS UNPLUGGED FROM THE MAINS SUPPLY*
SOURCE: desbloqueo del codigo m2 en konica minolta bizhub 163
Este código significa que la vida las partes de su desarrollo + unidad de imagen se ha caducado. Ahora es el momento de reemplazar las partes.
SOURCE: konica minolta Bizhub C6500 error code 2424
Hi, I have a C6500 Bizhub pro, but, recently displays an C2404 error. I need to print an urgent job and y can't!
Please helpme!
1,374 views
Usually answered in minutes!
×